SANlight STIXX 6-150 LED 141W - 381 μmol/s (AA5050)

Product detailed description

The longest STIXX for large areas and deep crops

SANlight STIXX 6-150 is the flagship top light of the range - six LED modules in a 150 cm long luminaire for large growing areas and installations with low height above the plants. It delivers 381 µmol/s at 141 W and evenly covers even a long space without darker edges. IP68 protection handles demanding, humid operation.

Parameters

• Power input: 141 W
• Photon flux PPF: 381 µmol/s
• Dimensions (LxWxH): 1366x85x16.9 mm
• Weight: 1.98 kg
• Beam angle: 90/135°
• Module efficiency: 3.1 µmol/J (measured at 50 % power, SANlight data)
• Spectrum: full spectrum 400-780 nm
• Protection: IP68
• Connector: M19 5-PIN
• LM90 lifespan: 53 000 h
• Warranty: 3 years
• Number of modules: 6
• Dimming: via blue connector on the driver (M-Dimmer / Bluetooth Dimmer)

Compatibility

Compatible:

• Driver Set STIXX 3/6 (200 / 240 / 320 / 610 / 910 W) - powers this luminaire; the 3/6 range is shared with the 3-80 model, but only one model may be on one driver at a time
• STIXX extension cables and splitters (T-Splitter, Y-Splitter), M19 5-PIN connector
• STIXX termination plug (AI5010) for unused DC ports on the driver
• SANlight dimmers M-Dimmer and Bluetooth Dimmer - via the blue connector on the driver
• Only luminaires of the same model on one driver

Incompatible:

• Drivers of other STIXX ranges - different output specification
• SANlight STIXX 50 - closed system with its own power unit
• EVO / Q-Series power cabling (Wieland connector) - different connector than M19
• FLEX II cabling (WDC19 connector) - different system

The luminaire does not light by itself - it needs a STIXX 3/6 driver

STIXX 6-150 is an LED luminaire without power supply. It is powered by the Driver Set STIXX 3/6 - the same driver range used by STIXX 3-80 as well. According to SANlight's official table, the 200 or 240 W driver runs one 6-150 luminaire at full power, 320 W runs two, and 610 and 910 W run three units. The driver, cables and accessories are purchased separately, so you size the power supply to the number of luminaires.

Which size to choose

6-150 is the longest and most powerful STIXX top light - the choice for full large tents and long benches. For a shorter space where 150 cm would overhang, STIXX 5-120 is more suitable. You can connect multiple 6-150 units with extension cables and M19 splitters within the same model.

Frequently asked questions

Which driver does STIXX 6-150 need?

Driver Set STIXX 3/6 - it shares the same driver range with the 3-80 model. According to SANlight's official table, the driver runs 1 to 3 6-150 luminaires at full power (200 and 240 W one, 320 W two, 610 and 910 W three). The driver, cables and accessories are purchased separately, so you size the power supply to the number of luminaires.

Can I combine 6-150 and 3-80 on one 3/6 driver?

No. Although 6-150 and 3-80 share the same STIXX 3/6 driver range, only one of these models may be on one driver at a time - either all 6-150 or all 3-80. They cannot be mixed on a shared driver. To expand, use additional luminaires of the same type, extension cables and M19 splitters, and fit the free ports with a termination plug.

How is STIXX 6-150 dimmed?

Dimming runs on the driver: you connect the magnetic M-Dimmer or Bluetooth Dimmer SANlight to its blue connector, or a 0-10V signal. The driver itself detects the number of connected modules and distributes the power between them, so you regulate the entire powered branch at once.