SANlight Driver Set STIXX 3/6, 910W (AI5113)

Product detailed description

Maximum driver for the STIXX 3/6 series

SANlight Driver Set STIXX 3/6, 910W is the top of this group - a Smart Driver that powers up to six STIXX 3-80 lights, or three STIXX 6-150 lights, from one place. It is aimed at large grow rooms, commercial multi-tier systems and full shelving, where central power supply for the whole area is more practical than a series of smaller drivers.

The driver is supplied without lights and cables, and is sold on its own. Fit it with STIXX 3-80 or STIXX 6-150 lights, which do not light up without power.

Parameters

• Type: power driver (Smart Driver) for the STIXX series
• Maximum output power: 910 W
• Designed for: STIXX 3-80 or STIXX 6-150 lights (always only one series)
• At full power (official SANlight table): six 3-80 lights (420 W) / three 6-150 lights (423 W)
• Rated input power of one light: 70 (3-80) or 141 (6-150) W
• Max. output current: 15.9 A
• Typical output voltage: 57 V DC
• Dimensions (L x W x H): 399 x 90 x 41.5 mm
• Weight: 3.11 kg
• Input voltage: 120-240/277 V AC, 50/60 Hz
• Dimming: blue connector on the driver (M-Dimmer, Bluetooth Dimmer or 0-10V)
• Unused DC ports: termination cap (mandatory)
• Water resistance: M19 connector on the light IP68; the driver mains plug is not water-resistant

Compatibility

Compatible:

• SANlight STIXX 3-80 lights (six lights at full power) or STIXX 6-150 lights (three lights at full power) - always only one series
• Undercanopy STIXX 3-80 and Undercanopy STIXX 6-150 - under-canopy versions of the same series
• SANlight termination cap (AI5010) for unused DC ports on the driver
• SANlight dimmers M-Dimmer and Bluetooth Dimmer, or 0-10V signal (blue connector on the driver)
• extension cables and M19 (5 PIN) splitters from STIXX accessories for connecting multiple lights

Incompatible:

• mixing STIXX 3-80 and STIXX 6-150 on one driver - identical lights are required
• other STIXX series (2-60, 4-100 and 5-120) - the driver is intended only for the 3/6 series
• STIXX 50 - a closed system with its own power supply, different wiring
• EVO and FLEX II lights - different connector and power supply

Ceiling of the STIXX 3/6 series

For the 3-80 series, the 910W driver handles six lights (6 x 70 W = 420 W), and for the 6-150 series three lights (423 W) - according to the official SANlight table. Above this number, you cannot power the STIXX 3/6 series at full power from one driver; that is its limit. It is especially suitable for commercial installation because it combines power supply and dimming for a large area into one point. Thanks to the Smart Driver, you add lights gradually and cap any unused ports for now.

Brightness control and unused ports

Control is centralised via the driver: the blue connector accepts the magnetic M-Dimmer, SANlight Bluetooth Dimmer and a 0-10V input, and controls the brightness of all connected lights. Free DC ports must not remain open - fit each one with the termination cap specified by the manufacturer to protect the system.

Water resistance

While the M19 connector on the light can withstand moisture (IP68), the driver mains plug cannot - protect it from water. Do not stack multiple drivers on top of each other and leave at least 10 mm between them.

Frequently asked questions

How many lights can the largest 3/6 driver handle?

At full rated power, it can handle six STIXX 3-80 lights (6 x 70 W = 420 W), or three STIXX 6-150 lights (3 x 141 W = 423 W) - according to the official SANlight table. That is the maximum of the STIXX 3/6 series at full power. You always power only one of the series; more lights will run at reduced power.

Can different STIXX series be mixed on one power supply?

No. One driver always powers only identical lights from the same series; the manufacturer explicitly forbids combining STIXX 3-80 with another STIXX model on a shared driver, because each series has a different input power. If you need different series, buy a separate driver for each one. You can connect more units of the same model with cables and M19 splitters.

Can I start with one light and add more gradually?

Yes, no problem. The driver also works with a single light: Smart Driver Technology detects the number of connected STIXX 3-80 lights and distributes power to them automatically. Up to the full number of lights, each one shines at full power; above that, the power is spread out and the lights run more dimly. This lets you start with a small setup and grow it to the recommended number.