SANlight Driver Set STIXX 3/6, 200 W (AI5101)
Code: N52821



Related products
Product detailed description
Input driver for the STIXX 3 and 6 ranges
SANlight Driver Set STIXX 3/6, 200 W is a Smart Driver for two related ranges at once: it powers either STIXX 3-80 or STIXX 6-150 lights. It is the smallest driver in this group, ideal for one longer 6-150 light or a pair of 3-80 lights.
It is sold on its own, without lights or cabling. Fit it with STIXX 3-80 lights (or STIXX 6-150), which will not light up without a driver.
Power cable for connecting the driver
A separate SANlight power cable, which is not included, is required to connect the driver to the mains. You can choose from two compatible variants:
- SANlight power cable for Q-Series Gen2 – variant with a straight connector.
- Angled SANlight power cable for EVO/Q-Series – variant with an angled connector.
Both cables are used to power this driver from the mains. Cables and splitters for connecting the driver to STIXX lights are selected separately according to the setup.
Specifications
- Type: power driver (Smart Driver) for the STIXX range
- Maximum output power: 200 W
- Designed for: STIXX 3-80 or STIXX 6-150 lights (one range only at a time)
- At full power (official SANlight table): two 3-80 lights (140 W) / one 6-150 (141 W)
- Rated power consumption of one light: 70 (3-80) or 141 (6-150) W
- Max. output current: 3.5 A
- Typ. output voltage: 57 V DC
- Dimensions (L x W x H): 231 x 90 x 41.5 mm
- Weight: 1.6 kg
- Input voltage: 120-240/277 V AC, 50/60 Hz
- Dimming: blue connector on the driver (M-Dimmer, Bluetooth Dimmer or 0-10V)
- Unused DC ports: termination cap (mandatory)
- Water resistance: M19 connector on the light IP68; the driver's mains plug is not water-resistant
Compatibility
Compatible:
- SANlight STIXX 3-80 lights (two lights at full power) or STIXX 6-150 (one light at full power) – one range only at a time
- Undercanopy STIXX 3-80 and Undercanopy STIXX 6-150 – under-ceiling versions of the same ranges
- SANlight termination cap (AI5010) for unused DC ports on the driver
- SANlight dimmers M-Dimmer and Bluetooth Dimmer, or a 0-10V signal (blue connector on the driver)
- M19 extension cables and splitters (5 PIN) from STIXX accessories for connecting multiple lights
Not compatible:
- mixing STIXX 3-80 and STIXX 6-150 on one driver – identical lights are required
- other STIXX ranges (2-60, 4-100 and 5-120) – the driver is designed only for the 3/6 range
- STIXX 50 – closed system with its own power supply and different cabling
- EVO and FLEX II lights – different connector and power supply
3-80 or 6-150? The number varies accordingly
The number of lights at full power differs between the two ranges according to their power consumption. According to the official SANlight table, the 200 W driver can power two STIXX 3-80 lights or one STIXX 6-150 light. Choose the range according to the area and installation length; you can find the specific quantities in the specifications. If you want three 3-80 lights, choose the more powerful 240 W version.
Dimming on the driver and port termination
The driver controls the light level: connect a Bluetooth Dimmer or SANlight M-Dimmer, or a 0-10V signal, to the blue connector, and the brightness changes on all lights simultaneously. Unused driver ports must be closed with a termination cap – without one, the system may be damaged.
Water resistance
The M19 connector on the LED light is water-resistant (IP68), but the driver's mains plug is not – protect its connection to the socket from moisture. Leave at least 10 mm between multiple drivers and do not stack them on top of one another.
Frequently asked questions
Is this driver for STIXX 3-80 or 6-150?
For both ranges, but only one of them at a time. You can connect either STIXX 3-80 lights or STIXX 6-150 lights to the driver, never both together on one driver. The identical-lights rule applies. The number of lights at full power differs between the two ranges according to their power consumption (70 W for 3-80, 141 W for 6-150).
Do all lights on the driver have to be identical?
Yes, they do. A shared driver can only be used with identical lights from one range – STIXX 3-80 therefore only with another STIXX 3-80. You must not connect two different STIXX models to one power supply, as each range has a different power consumption. If you are expanding with another model, purchase a separate driver for it; connect identical lights using M19 extension cables and splitters.
Do I need a termination cap for the driver?
Yes. The driver has more DC ports than you will typically use, and unused ports must be closed with a termination cap (AI5010). Without one, the system may be damaged, so consider it an essential part of the setup. It is supplied separately, not with the driver or lights.