SANlight STIXX 5-120 LED 117W - 317 μmol/s (AA5040)

Product detailed description

Powerful light for larger areas with a low profile

SANlight STIXX 5-120 combines five LED modules into a 120 cm long light for larger growing spaces where there is little room above the plants - high-yield tents and vertical tiers. It offers 317 µmol/s at 117 W and homogeneous light distribution along the entire length. IP68 protection also holds up in environments with high humidity.

Parameters

• Power input: 117 W
• PPF photon flux: 317 µmol/s
• Dimensions (LxWxH): 1131x85x16.9 mm
• Weight: 1.69 kg
• Beam angle: 90/135°
• Module efficiency: 3.1 µmol/J (measured at 50% power, SANlight data)
• Spectrum: full spectrum 400-780 nm
• Protection: IP68
• Connector: M19 5-PIN
• LM90 lifetime: 53,000 h
• Warranty: 3 years
• Number of modules: 5
• Dimming: via blue connector on the driver (M-Dimmer / Bluetooth Dimmer)

Compatibility

Compatible:

• Driver Set STIXX 5 (250 / 400 / 610 / 910 W) - powers this light (driver from the same range only)
• STIXX extension cables and splitters (T-Splitter, Y-Splitter), M19 5-PIN connector
• STIXX termination plug (AI5010) for unused DC ports on the driver
• SANlight dimmers M-Dimmer and Bluetooth Dimmer - via the blue connector on the driver
• Only lights of the same model on one driver

Incompatible:

• Drivers from other STIXX ranges - different output specification
• SANlight STIXX 50 - closed system with its own power unit
• EVO / Q-Series power cabling (Wieland connector) - different connector than M19
• FLEX II cabling (WDC19 connector) - different system

The light does not light up on its own - it needs a STIXX 5 driver

STIXX 5-120 is supplied as an LED light without power. It is paired with the Driver Set STIXX 5. According to SANlight's official table, 250 W and 400 W can power two 5-120 lights at full power, 610 W three and 910 W four units. The driver, cables and accessories are purchased separately, so you can set up the power supply exactly to the number of lights.

Which size to choose

5-120 is a step between 4-100 and the longest 6-150. Choose it when 4-100 leaves the edges of the area darker and the full STIXX 6-150 is too long for your space. You can connect a set of several 5-120 units with extension cables and M19 splitters within the same model.

Frequently asked questions

Which driver for STIXX 5-120?

Driver Set STIXX 5. The 5-120 range has its own driver series (250, 400, 610 and 910 W), which according to SANlight's official table powers 2 to 4 5-120 lights at full power (250 and 400 W two, 610 W three, 910 W four). The driver and cables are sold separately, so you can set up the power supply exactly to the number of lights in your installation.

Can I put the 5-120 on a driver with another STIXX model?

No. One driver powers only identical lights of the same range, so STIXX 5-120 with STIXX 5-120. A combination with 4-100 or 6-150 on a shared driver is not permitted. You can connect multiple 5-120 lights with extension cables and M19 splitters and fit the driver's free ports with a termination plug.

How is STIXX 5-120 controlled?

Control takes place on the driver - you connect the magnetic M-Dimmer or Bluetooth Dimmer SANlight to its blue connector, or alternatively a 0-10V signal. The driver detects the number of connected modules and distributes the power between them, so you adjust the intensity of the entire powered branch at once.