SANlight Driver Set STIXX 5, 610 W (AI5112)
Code: N52832



Related products
Product detailed description
Powerful driver for three 5-120 lights
SANlight Driver Set STIXX 5, 610 W is a powerful Smart Driver for the STIXX 5-120 range. One power supply can run three of the most powerful STIXX lights at full power – allowing you to create an intensely lit large tent or multiple rows above one another without a network of smaller drivers. It powers only the STIXX 5 range.
The driver is supplied separately, without lights or cables. Fit it with STIXX 5-120 lights, which do not light up on their own.
Power cable for connecting the driver
A separate SANlight power cable, which is not included, is required to connect the driver to the mains. You can choose from two compatible variants:
- SANlight power cable for Q-Series Gen2 – variant with a straight connector.
- Angled SANlight power cable for EVO/Q-Series – variant with an angled connector.
Both cables are used to power this driver from the mains. Cables and splitters for connecting the driver to STIXX lights are selected separately according to the setup.
Specifications
- Type: power driver (Smart Driver) for the STIXX range
- Maximum output power: 610 W
- Designed for: STIXX 5-120 lights (same range only)
- At full power (official SANlight table): three lights (3x 117 W = 351 W)
- Rated power consumption of one light: 117 W
- Max. output current: 6.4 A
- Typical output voltage: 76 V DC
- Dimensions (L x W x H): 391 x 90 x 41.5 mm
- Weight: 2.82 kg
- Input voltage: 120-240/277 V AC, 50/60 Hz
- Dimming: blue connector on the driver (M-Dimmer, Bluetooth Dimmer or 0-10V)
- Unused DC ports: termination cap (mandatory)
- Water resistance: M19 connector on the light IP68; the driver's mains plug is not water-resistant
Compatibility
Compatible:
- SANlight STIXX 5-120 and Undercanopy STIXX 5-120 lights – three lights at full power
- SANlight termination cap (AI5010) for unused DC ports on the driver
- SANlight M-Dimmer and Bluetooth Dimmer dimmers, or a 0-10V signal (blue connector on the driver)
- M19 extension cables and splitters (5 PIN) from STIXX accessories for connecting multiple lights
Not compatible:
- Ostatní STIXX ranges (2-60, 3-80, 4-100 and 6-150) – the driver is designed only for its own range
- Mixing different STIXX models on one driver – identical lights are required
- STIXX 50 – closed system with its own power supply and different cabling
- EVO and FLEX II lights – different connector and power supply
Central power supply and reserve
The driver powers three STIXX 5-120 lights (3x 117 W = 351 W) at full power according to the official SANlight table. One powerful driver means shared dimming and simpler distribution across the entire area. Smart Driver Technology allows you to fill the ports gradually – start with some of the lights and add more over time; above three lights, the lights operate at reduced power. A 910 W version is available for four lights at full power.
Dimming on the driver and port termination
The driver handles light dimming: connect a Bluetooth Dimmer or SANlight M-Dimmer to the blue connector, or use a 0-10V signal, and the brightness changes on all lights simultaneously. Unused driver ports must be closed with a termination cap – without it, the system may be damaged.
Water resistance and installation
Only the M19 connector on the light is water-resistant (IP68); keep the driver's mains plug dry. When using multiple drivers, maintain a minimum distance of 10 mm between them and do not stack them.
Frequently asked questions
How many STIXX 5-120 lights can the 610 W driver run?
It can run three STIXX 5-120 lights at their full rated power (3x 117 W = 351 W), according to the official SANlight table. More than three lights can be connected, but the power is divided and the lights operate at reduced power. For four lights at full power, choose the 910 W version.
Do all lights on the driver have to be identical?
Yes, they do. A shared driver is intended only for identical lights from one range – STIXX 5-120 must therefore be used only with another STIXX 5-120. You must not connect two different STIXX models to one power supply, as each range has a different power consumption. If you are expanding with another model, purchase a separate driver for it; connect identical lights using M19 extension cables and splitters.
Will the driver operate with fewer lights than the maximum?
Yes. The Smart Driver detects how many lights are connected and adjusts the power accordingly. Up to the full number of lights, each STIXX 5-120 light operates at full power, so you can start with one and add more over time. Fit termination caps to any unused DC ports.