SANlight STIXX 3-80 LED 70 W - 191 µmol/s (AA5020)

Product detailed description

Slim top light for tents and vertical systems

SANlight STIXX 3-80 is a linear LED light made up of three modules, designed as the main lighting solution where space above the plants is limited – for lower tents, shelving and multi-level installations. It delivers 191 µmol/s at 70 W, distributes light evenly without harsh hotspots and, thanks to its IP68 rating, handles more humid professional environments. The slim body measures 676 x 85 x 16.9 mm and weighs just 1.03 kg.

Specifications

• Power consumption: 70 W
• Photon flux PPF: 191 µmol/s
• Number of modules: 3
• Module efficacy: STIXX range up to 3.1 µmol/J (figure from the range information sheets)
• Spectrum: full spectrum 400-780 nm
• Beam angle: 90/135°
• Dimensions: 676 x 85 x 16.9 mm
• Weight: 1.03 kg
• Protection rating: IP68
• Connector: M19 5-PIN
• LM90 lifespan: >53,000 h
• Dimming: via the blue connector on the driver (M-Dimmer / Bluetooth Dimmer)
• Warranty: 3 years

Compatibility

Compatible:

• Driver Set STIXX 3/6 (required) – at full power: 200 W for two lights, 240 W for three, 320 W for three, 610 W for four, 910 W for six
• STIXX cabling and accessories (M19 5-PIN): extension cables, T and Y splitters – only between lights of the same STIXX 3-80 model
• Termination cap for unused DC ports on the driver – required
• M-Dimmer and Bluetooth Dimmer dimmers connect to the blue connector on the driver

Not compatible:

• Drivers for the STIXX 2, 4 and 5 ranges – different power allocation to the lights
• Mixing with other STIXX models on one driver – only identical lights of the same model
• STIXX 50 – a standalone system with its own power supply and different cabling
• EVO and FLEX II ranges – different connector (Wieland / WDC19)

Will not light without a driver

STIXX 3-80 is an LED light only, without a power supply. To operate it, you need a Driver Set STIXX 3/6, and any unused driver ports must be fitted with a termination cap; otherwise, the system may be damaged. You can find the exact number of lights for each driver in the Compatibility section.

Dimming

STIXX 3-80 is not dimmed on the light itself, but on the driver: connect a magnetic SANlight M-Dimmer or Bluetooth Dimmer to its blue connector, or use a 0-10V signal. The driver also automatically detects how many lights are connected and distributes the power between them.

Frequently asked questions

Do I need a separate driver for the STIXX 3-80?

Yes. STIXX 3-80 is an LED light only and will not light without a driver. You need a Driver Set STIXX 3/6 (200 to 910 W), depending on the number of lights – you can find the exact number for full power in the Compatibility section. The driver, cables and accessories are sold separately.

Can I connect different STIXX modules to one driver?

No. Only identical lights of the same model may be connected to one driver – for example, STIXX 3-80 with STIXX 3-80. STIXX 3-80 and STIXX 4-100 cannot be combined on the same driver. To connect more lights of the same model, use M19 extension cables and splitters, and fit termination caps to any unused ports.

Why is the termination cap required?

The STIXX driver has more DC ports than you will typically need to connect lights. Every unused port must be closed with a termination cap – without one, the system may be damaged. It is an inexpensive but essential part that must not be forgotten when assembling the setup.