SANlight STIXX 2-60 LED 47W - 127 μmol/s (AA5010)

Product detailed description

The smallest STIXX for cuttings, seedlings and vertical shelves

SANlight STIXX 2-60 is a compact linear LED luminaire made up of two modules, designed as the main lighting for tight spaces - for cuttings and seedlings, low shelving and multilayer systems. It delivers 127 µmol/s at 47 W, distributes light evenly without harsh hotspots and, thanks to IP68 protection, also handles a more humid professional environment.

Parameters

• Power input: 47 W
• PPF photon flux: 127 µmol/s
• Dimensions (LxWxH): 476x85x16.9 mm
• Weight: 0.74 kg
• Beam angle: 90/135°
• Module efficiency: 3.1 µmol/J (measured at 50% power, SANlight data)
• Spectrum: full spectrum 400-780 nm
• Protection: IP68
• Connector: M19 5-PIN
• LM90 lifetime: 53,000 h
• Warranty: 3 years
• Number of modules: 2
• Dimming: via blue connector on the driver (M-Dimmer / Bluetooth Dimmer)

Compatibility

Compatible:

• Driver Set STIXX 2 (160 / 270 / 530 W) - powers this luminaire (driver from the same series only)
• STIXX extension cables and splitters (T-Splitter, Y-Splitter), M19 5-PIN connector
• STIXX termination plug (AI5010) for unused DC ports on the driver
• SANlight dimmers M-Dimmer and Bluetooth Dimmer - via the blue connector on the driver
• Only luminaires of the same model on one driver

Incompatible:

• Drivers of other STIXX series - different output specification
• SANlight STIXX 50 - closed system with its own power unit
• EVO / Q-Series power cabling (Wieland connector) - different connector than M19
• FLEX II cabling (WDC19 connector) - different system

The luminaire does not light on its own - it needs a STIXX 2 driver

STIXX 2-60 is just the LED luminaire without power supply. To get it running, you need a Driver Set STIXX 2. According to SANlight's official table, the 160 W and 270 W drivers can run three 2-60 luminaires at full power, while the most powerful 530 W driver can run six. The driver, cables and accessories are purchased separately, so you can size the setup exactly for your installation.

Which size to choose

2-60 is the entry-length STIXX (60 cm) for the smallest areas and low installation height. When you need to cover a deeper space, choose the longer STIXX 3-80 or higher models. Luminaires of the same model are linked with M19 extension cables and splitters, but only within one series.

Frequently asked questions

Do I need a separate driver for the STIXX 2-60?

Yes. STIXX 2-60 is only an LED luminaire and does not light without a driver. You need a Driver Set STIXX 2 (160, 270 or 530 W) depending on how many luminaires you want to power - the 160 W and 270 W drivers can run three 2-60 luminaires at full power, the 530 W driver six. The driver, cables and accessories are sold separately, so you can size the setup exactly for your installation.

Can I connect a 2-60 together with another STIXX on one driver?

No. One driver may only have identical modules from the same series, so STIXX 2-60 with STIXX 2-60. A combination with STIXX 3-80 or 4-100 on a shared driver is not possible. For more luminaires of the same model, use M19 extension cables and splitters and fit the unused driver ports with a termination plug.

How is the STIXX 2-60 dimmed?

It is dimmed on the driver, not on the luminaire. You connect the magnetic M-Dimmer or Bluetooth Dimmer SANlight to the driver's blue connector, or a 0-10V signal. The driver itself detects how many modules are connected and distributes the power between them, so the control applies to the whole branch at once.