SANlight Driver Set STIXX 2, 530W (AI5109)

Product detailed description

One driver for the entire STIXX 2-60 wall

SANlight Driver Set STIXX 2, 530W is the most powerful Smart Driver in the STIXX 2 range - according to the official SANlight table, it powers up to six STIXX 2-60 lights at full power. This makes it the backbone of large growing areas, vertical farms and multi-level shelving, where a network of small drivers would mean more cabling and sockets. It powers the STIXX 2 range only.

The driver is supplied without lights and cables. You fit it with STIXX 2-60 lights, which do not illuminate on their own and are purchased separately.

Power cable for connecting the driver

A separate SANlight power cable, which is not included, is required to connect the driver to the mains. You can choose from two compatible variants:

• SANlight power cable for Q-Series Gen2 – variant with a straight connector.
• Angled SANlight power cable for EVO/Q-Series – variant with an angled connector.

Both cables are used to power this driver from the mains. Cables and splitters for connecting the driver to STIXX lights are selected separately according to the configuration.

Specifications

• Type: power driver (Smart Driver) for the STIXX range
• Maximum output power: 530 W
• Designed for: STIXX 2-60 lights (same range only)
• At full power (official SANlight table): six lights (6x 47 W = 282 W)
• Rated power consumption of one light: 47 W
• Max. output current: 14.0 A
• Typ. output voltage: 38 V DC
• Dimensions (L x W x H): 391 x 90 x 41.5 mm
• Weight: 2.82 kg
• Input voltage: 120-240/277 V AC, 50/60 Hz
• Dimming: blue connector on the driver (M-Dimmer, Bluetooth Dimmer or 0-10V)
• Unused DC ports: termination cap (mandatory)
• Water resistance: M19 connector on the light IP68; the driver's mains plug is not water-resistant

Compatibility

Compatible:

• SANlight STIXX 2-60 and Undercanopy STIXX 2-60 lights - six lights at full power
• SANlight termination cap (AI5010) for unused DC ports on the driver
• SANlight M-Dimmer and Bluetooth Dimmer dimmers, or a 0-10V signal (blue connector on the driver)
• M19 extension cables and splitters (5 PIN) from STIXX accessories for connecting multiple lights

Incompatible:

• Ostatní STIXX ranges (3-80, 4-100, 5-120 and 6-150) - the driver is intended for its own range only
• Mixing different STIXX models on one driver - identical lights are required
• STIXX 50 - closed system with its own power supply and different cabling
• EVO and FLEX II lights - different connector and power supply

Why centralise with one large driver

The driver powers six STIXX 2-60 lights at full power according to the official SANlight table. The advantage of a central driver is simpler distribution and one location for dimming the entire area. Thanks to Smart Driver Technology, you do not have to fill all ports immediately - start with a few lights and add more gradually, while above six lights the lights operate at reduced power.

How to dim and terminate the driver

You will find a blue connector for dimming on the driver - connect an SANlight M-Dimmer or Bluetooth Dimmer to it, or send a 0-10V signal, and all lights will dim simultaneously. Unused ports must be terminated with a termination cap; otherwise, you risk damaging the system.

IP rating and clearances

IP68 protection applies to the M19 connector on the light; the driver's mains plug is not water-resistant. Do not stack drivers on top of one another; leave at least a 10 mm gap between them.

Frequently asked questions

How many STIXX 2-60 lights can the 530W driver power?

At full rated power, it can power six STIXX 2-60 lights (6x 47 W = 282 W) - this is stated in the official SANlight table. This is the maximum for the STIXX 2 range. The driver also works with more than six lights, but distributes the power between all of them, so the lights operate at reduced brightness.

Can different STIXX ranges be mixed on one driver?

No. One driver always powers identical lights from the same range; the manufacturer expressly prohibits combining STIXX 2-60 with another STIXX model on the same driver because each range has a different power consumption. If you need different ranges, purchase a separate driver for each one. Connect multiple pieces of the same model using M19 cables and splitters.

Can I start with one light and add more gradually?

Yes, without any problem. The driver also works with a single light: Smart Driver Technology detects the number of connected STIXX 2-60 lights and distributes the power between them automatically. Up to the full number of lights, each operates at full power; above that number, the power is spread out and the lights operate at lower power. You can therefore start with a small configuration and build it up to the recommended number.