SANlight FLEX II LED 25W, LED light

Product detailed description

The largest LED light in the FLEX II series

SANlight FLEX II 25W is the longest and most powerful light in the FLEX II series. With a length of 1345 mm and a width of 33 mm, it covers a longer section with light than the smaller 10W and 20W lights, while retaining the same slim profile, passive cooling and IP68 protection. It is suitable wherever you need compact light for a longer area - for young plants, microgreens, illuminating lower levels or as interlighting between plants.

Parameters

• Rated power consumption: 24 W (25 W series)
• Efficiency: >2.6 µmol/J (SANlight data)
• Photon flux PPF: 62.5 µmol/s
• Dimensions: 1345 x 33 x 16 mm (length x width x height)
• Operating current: 520 mA
• Weight: approx. 0.67 kg
• Connector: WDC19 (44-48 V DC)
• Protection: IP68 (connector IP65)
• Beam angle: 113-133° (rectangular distribution)
• Spectrum: full spectrum with an increased FarRed/Red ratio
• LM90 lifespan: >100,000 h
• Warranty: 3 years

Compatibility

Compatible:

• FLEX II power supplies according to the number of lights: GST30 (1 pc), GST65 (2 pcs), 150 W with Wieland connector / without AC (5 pcs), 240 W with Wieland connector / without AC (9 pcs), 320 W with Wieland connector / without AC (12 FLEX II 25 lights)
• Splitters for power supplies with WDC19 output: four-way, two-way and T-connector
• Splitters for high-power supplies with WDC21 output: four-way and two-way
• WDC19 extension cables: 0.6 m and 1 m

Incompatible:

• EVO/Q-Series power cables and connectors (Wieland AC) - different system and connector
• STIXX cabling and drivers (M19 5-pin) - different connector
• SANlight BT-Dimmer and M-Dimmer dimmers - designed for EVO and STIXX series; FLEX II is controlled by driver output or external 0-10V on the driver

Spectrum for roots and young plants

As with the entire series, the FLEX II 25W also has a broadband spectrum with an increased FarRed/Red ratio, which supports rooting of cuttings and early-stage plant growth. Thanks to its length of 1345 mm, it spreads this spectrum over the largest area of all FLEX II lights.

Power supply: requires a separate GST power supply

FLEX II 25 is a light without its own power supply - you cannot plug it directly into a socket. It is powered via a GST power supply from the FLEX II series. The smallest GST30 handles one unit, the more powerful GST65 two units; the lights are interconnected with WDC19 cabling.

Frequently asked questions

Does FLEX II 25W have an integrated plug-in power supply?

No. FLEX II 25W is a standard LED light with a WDC19 connector and is powered via a separate GST power supply - you cannot plug it directly into a socket. In SANlight terminology, the name 'Wallplug' refers to the socket power supply from the FLEX II series (for example GST30), not this light. To switch it on, you therefore need one of the GST power supplies.

Which power supply do I need for FLEX II 25?

Any GST power supply from the FLEX II series. GST30 powers one FLEX II 25 light, GST65 powers two. For more units in one line, choose a stronger power supply: the 150W version handles five lights, 240W nine and 320W up to twelve. The power supply and WDC19 connecting cables are not included with the light.

Can FLEX II 25W be dimmed?

Not with SANlight M-Dimmer and Bluetooth Dimmer - these belong to the EVO and STIXX series and cannot be connected to the FLEX II connector. You control the FLEX II light by selecting the driver output, or alternatively by an external 0-10V signal on the driver that offers this function.