SANlight FLEX II 150W power supply without AC connector

Product detailed description

150W FLEX II power supply for fixed connection to the mains

SANlight FLEX II 150 W in the version without an AC connector is a power supply for medium FLEX II installations that you connect permanently to the electrical distribution. On the mains (AC) side, it does not have a ready-made end connector, but loose wires - it is suitable where you want to connect the power supply permanently, not via a socket.

Parameters

• Max. power: 150 W
• Input voltage: 100-240 V AC (multi-range)
• Max. current draw: 0.75 A at 230 V AC
• AC side: loose wires (without connector)
• DC output: WDC21
• Min. load: 1x FLEX II 10

Compatibility

Compatible:

• FLEX II luminaires: 15x FLEX II 10, 7x FLEX II 20 or 5x FLEX II 25
• Splitters with WDC21 male connector (the power supply output is WDC21): four-way and two-way WDC21 splitter
• WDC19 extension cables between luminaires

Incompatible:

• Splitters with WDC19 male connector (for small GST30/GST65 power supplies) - different output connector
• EVO/Q-Series and STIXX luminaires and cabling - different system (the Wieland connector on the power supply is only for connection to the mains, not for powering EVO luminaires)
• SANlight BT-Dimmer and M-Dimmer dimmers - FLEX II does not have a SANlight dimmer

When to choose the version without a connector

The version without an AC connector is appreciated by anyone who connects the power supply to the fixed distribution of the grow room - permanently to the circuit breaker, where a ready-made socket end would only get in the way. An electrician handles the mains connection. If you want to simply plug the power supply into prepared cabling, choose the version with a ready-made Wieland connector.

Frequently asked questions

How does the version without an AC connector differ?

Only on the mains side. Instead of a ready-made Wieland end connector, it has loose wires that are connected permanently to the distribution. The WDC21 DC output, 150 W power and the number of powered luminaires are identical to the version with a connector. Choose according to whether you are connecting the power supply to a socket/cabling, or permanently to the distribution.

How many FLEX II luminaires can this power supply handle?

The 150 W power supply powers up to 15 FLEX II 10 luminaires, 7 FLEX II 20 units or 5 FLEX II 25 units of one type, with a minimum load of one FLEX II 10 luminaire. Use a splitter with a WDC21 male connector and WDC19 interconnection for distribution.

Can I dim FLEX II through this power supply?

No. FLEX II does not have any SANlight dimmer and the power supply has a fixed output. Intensity control is only possible via a driver with support for an external 0-10V signal. Otherwise, the power supply runs the connected luminaires at full power.