SANlight FLEX II power supply 320W without AC connector

Product detailed description

The most powerful FLEX II power supply for fixed wiring

The SANlight FLEX II 320 W version without an AC connector is the most powerful power supply in the range, designed for fixed electrical installation. The mains (AC) side does not have a ready-made end connector - it has loose wires that an electrician connects permanently. This makes sense for large permanent systems, where one power supply can power the entire FLEX II wall.

Parameters

• Max. power: 320 W
• Input voltage: 100-240 V AC (multi-range)
• Max. current draw: 1.5 A at 220 V AC
• AC side: loose wires (without connector)
• DC output: WDC21
• Min. load: 1x FLEX II 20

Compatibility

Compatible:

• FLEX II luminaires: 30x FLEX II 10, 14x FLEX II 20 or 12x FLEX II 25
• Splitters with a WDC21 male connector (the power supply output is WDC21): four-way and two-way WDC21 splitter
• WDC19 extension cables between luminaires
• Minimum load: 1x FLEX II 20 (the FLEX II 10 luminaire alone does not load this powerful power supply sufficiently)

Incompatible:

• Splitters with a WDC19 male connector (for small GST30/GST65 power supplies) - different output connector
• EVO/Q-Series and STIXX luminaires and cabling - different system (the Wieland connector on the power supply is only for connection to the mains, not for powering EVO luminaires)
• SANlight BT-Dimmer and M-Dimmer dimmers - FLEX II does not have a SANlight dimmer

When to choose the version without a connector

Choose it when the power supply belongs in fixed wiring and you connect it permanently, not via a socket - typically in a large permanent installation. If you want to simply plug the power supply into prepared cabling, choose the version with a ready-made Wieland connector. The power output and DC output are identical on both.

Frequently asked questions

How does the version without an AC connector differ?

Only in the mains side - instead of a Wieland end connector, it has loose wires for permanent connection into the wiring. The 320 W power, WDC21 DC output and the number of powered luminaires are the same as on the connector version. Choose according to the way you connect it to the mains.

How many FLEX II luminaires can this power supply handle?

It powers up to 30 FLEX II 10 luminaires, 14 FLEX II 20 units or 12 FLEX II 25 units of one type, with a minimum load of one FLEX II 20 luminaire. Distribution is handled with a splitter with a WDC21 male connector and WDC19 linking.

Can it be dimmed through this power supply?

No. FLEX II has no SANlight dimmer and the power supply has a fixed output. Intensity can only be adjusted via a driver with support for an external 0-10V signal; otherwise the power supply powers the luminaires at full power.