SANlight FLEX II power supply 320W with Wieland connector

Product detailed description

The most powerful FLEX II power supply for maximum chaining

SANlight FLEX II 320 W is the most powerful power supply in the range - built for large installations where you power an entire wall of FLEX II luminaires from one source. This version has a ready-made Wieland connector on the mains (AC) side for quick connection to the cabling.

Parameters

• Max. power: 320 W
• Input voltage: 100-240 V AC (multi-range)
• Max. current draw: 1.5 A at 220 V AC
• AC side: ready-made Wieland connector
• DC output: WDC21
• Min. load: 1x FLEX II 20

Compatibility

Compatible:

• FLEX II luminaires: 30x FLEX II 10, 14x FLEX II 20 or 12x FLEX II 25
• Splitters with WDC21 male (the power supply output is WDC21): four-way and two-way WDC21 splitter
• WDC19 extension cables between luminaires
• Minimum load: 1x FLEX II 20 (a single FLEX II 10 luminaire does not load this powerful power supply sufficiently)

Incompatible:

• Splitters with WDC19 male (for small GST30/GST65 power supplies) - different output connector
• EVO/Q-Series and STIXX luminaires and cabling - different system (the Wieland connector on the power supply is only for connection to the mains, not for powering EVO luminaires)
• SANlight BT-Dimmer and M-Dimmer dimmers - FLEX II does not have a SANlight dimmer

With a Wieland connector, or without a connector?

We offer the 320 W power supply in two versions depending on the mains side. The version with a Wieland connector has a ready-made end and you connect it to the cabling without any work. The version without an AC connector has loose wires for fixed connection to the distribution. The power and DC output WDC21 are the same for both.

Frequently asked questions

How many luminaires can the FLEX II 320W power supply power?

The most powerful power supply in the range can handle up to 30 FLEX II 10 luminaires, 14 FLEX II 20 units or 12 FLEX II 25 units of one type. However, the minimum load is one FLEX II 20 luminaire - do not use this power supply with a single small FLEX II 10. You distribute the luminaires with a splitter with a WDC21 male and connect them with WDC19 cabling.

Why is the minimum load FLEX II 20?

The powerful 320W power supply needs a certain minimum load to work properly. A single smallest FLEX II 10 luminaire would not load it enough, which is why the manufacturer states one FLEX II 20 luminaire as the minimum. In practice, however, you buy such a powerful power supply for chaining many luminaires, where the load is always higher.

Can I dim via the FLEX II 320W power supply?

No. FLEX II does not have any SANlight dimmer and the power supply has a fixed output. The intensity can only be adjusted via a driver with support for external 0-10V control; otherwise the luminaires shine at full power.