SANlight FLEX II power supply 240W without AC connector

Product detailed description

240W FLEX II power supply for fixed wiring

SANlight FLEX II 240 W in the version without an AC connector is a powerful power supply for larger FLEX II installations, designed for permanent connection to the electrical wiring. The mains (AC) side does not have a ready-made end connector - it has loose wires that an electrician connects permanently. This is suitable for fixed multi-level setups.

Parameters

• Max. power: 240 W
• Input voltage: 100-240 V AC (multi-range)
• Max. current draw: 1.1 A at 220 V AC
• AC side: loose wires (without connector)
• DC output: WDC21
• Min. load: 1x FLEX II 10

Compatibility

Compatible:

• FLEX II luminaires: 22x FLEX II 10, 11x FLEX II 20 or 9x FLEX II 25
• Splitters with a WDC21 male connector (the power supply output is WDC21): four-way and two-way WDC21 splitter
• WDC19 extension cables between luminaires

Incompatible:

• Splitters with a WDC19 male connector (for small GST30/GST65 power supplies) - different output connector
• EVO/Q-Series and STIXX luminaires and cabling - different system (the power supply's Wieland connector is used only for connection to the mains, not for powering EVO luminaires)
• SANlight BT-Dimmer and M-Dimmer dimmers - FLEX II has no SANlight dimmer

When to choose the version without a connector

Choose it when the power supply is part of a fixed electrical installation and you connect it permanently, not via a socket. If you want to simply plug the power supply into prepared wiring without an electrician's work, choose the version with a ready-made Wieland connector. The power output is identical for both.

Frequently asked questions

How does the version without an AC connector differ?

Only on the mains side - instead of a Wieland end connector, it has loose wires for fixed connection to the wiring. The 240 W output, WDC21 DC output and the number of powered luminaires are the same as with the version with a connector. You decide according to the way it is connected to the mains.

How many FLEX II luminaires can this power supply handle?

It powers up to 22 FLEX II 10 luminaires, 11 FLEX II 20 units or 9 FLEX II 25 units of one type, with a minimum load of one FLEX II 10 luminaire. Distribution is handled with a splitter with a WDC21 male connector and WDC19 linking.

Can it be dimmed through this power supply?

No. FLEX II has no SANlight dimmer and the power supply has a fixed output. The intensity can only be regulated via a driver with support for an external 0-10V signal; otherwise the power supply runs the luminaires at full power.