SANlight FLEX II 150W power supply with Wieland connector

Product detailed description

Powerful 150W FLEX II power supply with ready-made mains connector

SANlight FLEX II 150 W is a power supply for medium FLEX II installations - one power supply lights up an entire row of luminaires on a shelf or across multiple levels. This version has a ready-made Wieland connector on the mains (AC) side, so you can connect it to prepared wiring without connecting wires.

Parameters

• Max. power: 150 W
• Input voltage: 100-240 V AC (multi-range)
• Max. current draw: 0.75 A at 230 V AC
• AC side: ready-made Wieland connector
• DC output: WDC21
• Min. load: 1x FLEX II 10

Compatibility

Compatible:

• FLEX II luminaires: 15x FLEX II 10, 7x FLEX II 20 or 5x FLEX II 25
• Splitters with WDC21 male connector (the power supply output is WDC21): four-way and two-way WDC21 splitter
• WDC19 extension cables between luminaires

Incompatible:

• Splitters with WDC19 male connector (for small GST30/GST65 power supplies) - different output connector
• EVO/Q-Series and STIXX luminaires and wiring - different system (the power supply's Wieland connector is only for connecting to the mains, not for powering EVO luminaires)
• SANlight BT-Dimmer and M-Dimmer dimmers - FLEX II has no SANlight dimmer

With Wieland connector, or without connector?

The power supply is available in two versions differing only on the mains (AC) side. The version with Wieland connector has a ready-made end for quick insertion into the wiring. The version without AC connector has loose mains wires for fixed connection to the distribution system. The power and DC output WDC21 are the same for both.

Frequently asked questions

How many luminaires does the FLEX II 150W power supply power?

The 150 W power supply can handle up to 15 FLEX II 10 luminaires, 7 FLEX II 20 units or 5 FLEX II 25 units, if you connect only one type, with a minimum load of one FLEX II 10 luminaire. You distribute the luminaires to it with a splitter cable with a WDC21 male connector and connect them with WDC19 wiring.

What does 'with Wieland connector' mean?

The Wieland connector is a ready-made mains end on the AC side of the power supply - you connect it to prepared wiring without connecting wires. Do not confuse it with powering EVO luminaires: although EVO also uses a Wieland connector, here it is only about connecting the power supply to the mains. The DC WDC output always leads to the FLEX II luminaires themselves. The version without AC connector has loose wires instead of an end.

Can I dim this FLEX II power supply?

Not directly. SANlight does not produce any dimmer for FLEX II. Intensity can only be regulated where the driver supports external 0-10V control; otherwise the power supply powers the luminaires at full power. Power is therefore mainly handled by choosing the correct power supply and number of luminaires.