SANlight EVO LED Set 120 - 530W for 120x120cm 3 µmol/J - V1.5

Product detailed description

Two luminaires for even coverage of 120x120 cm

SANlight EVO LED Set 120 is designed for a fully equipped 120x120 cm tent. Instead of one powerful lamp, it uses two EVO 4-120 luminaires, which together deliver 530 W and 1450 µmol/s and distribute the light more evenly across the area, without pronounced hotspots above the centre. Both luminaires benefit from the high efficiency of the EVO 1.5 range.

Parameters

• Luminaires in the set: 2x SANlight EVO 4-120
• Total input power: 530 W (2x 265 W)
• Total photon flux PPF: 1450 µmol/s (2x 725 µmol/s)
• Module efficiency: >3 µmol/J (SANlight data)
• Recommended area: 120x120 cm
• Spectrum: full, 400-780 nm
• Ingress protection: IP65
• Supply voltage: 100-240/277 VAC, 50/60 Hz
• LM90 lifetime: >90,000 h
• Set weight: 17.55 kg
• Warranty: 3 years

Compatibility

Compatible:

• SANlight extension cable for EVO/Q-Series Gen2 in 1 and 2 m versions or angled 1 m version for a longer supply lead (Wieland RST20i3 connector)
• Power distribution boxes for connecting additional luminaires to one supply: 4-way connector and Wieland splitter
• Dimmers for the blue control connector: SANlight Bluetooth Dimmer or replacement M-Dimmer in addition to or instead of the supplied one
• SANlight ratchet hanger as a height-adjustable alternative to the supplied hangers
• Adapters for control via an external controller: GrowControl and Trolmaster

Incompatible:

• EVO Compact 400V cabling and connector (different connector - AC Power Plug 400V, not Wieland RST20i3)
• STIXX series cabling and drivers (different system - M19 5-PIN connector)
• FLEX II power supplies and cabling (different connector - WDC19)

Luminaires in the set: 2 pcs EVO 4-120

The set is based on two identical SANlight EVO 4-120 luminaires (2 pcs). Each measures 1018 mm in length and 291 x 116 mm in cross-section, weighs 5.1 kg and shines at an angle of 90-112°. The pair of longer modules spreads 1450 µmol/s across the entire 120x120 cm area more evenly than a single lamp and reduces both an overlit centre and darker corners. IP65 protection and an operating temperature of 5-30 °C make the set suitable even for more humid environments.

What is in the box

The set is factory-prepared for operating both luminaires from one supply:

• 2x SANlight EVO 4-120 LED luminaire (265 W)
• 1x power Y cable (total length 3.30 m; from plug to splitter 1.80 m, from splitter to luminaire 1.50 m)
• 4x SANlight hanger in total (2 pairs), each with a load capacity of 34 kg
• 2x SANlight M-Dimmer

The individual luminaire from the set is SANlight EVO 4-120; if you later need to expand the space, you can buy another piece separately.

When to choose the larger set

Set 120 is suitable for a square 120x120 cm tent. For a larger 150x150 cm area, the more powerful EVO LED Set 150 (680 W, 2x EVO 5-150) is available. Both are based on two luminaires from the EVO 1.5 range and differ in output and module length according to the target area.

Frequently asked questions

Why does Set 120 have two luminaires?

Two EVO 4-120 luminaires distribute the light across the 120x120 cm area more evenly than one lamp and together deliver 530 W and 1450 µmol/s. Even coverage means more balanced growth throughout the tent, not just under the centre. Both luminaires are powered from one supply via the included Y cable.

Will one socket be enough?

Yes. The set includes a power Y cable that splits one supply to both luminaires, so one socket is enough for the installation. Each luminaire has its own M-Dimmer, so you can set the output for both lamps independently.

How are the luminaires dimmed?

Each of the two luminaires comes with its own magnetic M-Dimmer, which connects to the blue control connector and sets the output in fixed steps. The M-Dimmers can be replaced with SANlight Bluetooth Dimmers or the luminaires can be connected to a shared 0-10V controller and the whole tent controlled centrally.