SANlight EVO LED Set 80 - 265 W for 80 x 80 cm 3 µmol/J - V1.5

Product detailed description

A set with more light for an 80 x 80 cm area

The SANlight EVO LED Set 80 is a step up from the smallest set: an equally simple kit with one light, but with the more powerful EVO 4-80 model. It delivers 265 W and 725 µmol/s and is designed for an 80 x 80 cm area, giving you more light output in a medium-sized tent than the Set 60. Efficiency remains at the high level of the entire EVO 1.5 range.

Specifications

• Light included in the set: 1x SANlight EVO 4-80
• Power consumption: 265 W
• Photon flux PPF: 725 µmol/s
• Module efficiency: >3 µmol/J (SANlight data)
• Recommended area: 80 x 80 cm
• Spectrum: full, 400-780 nm
• Protection rating: IP65
• Supply voltage: 100-240/277 VAC, 50/60 Hz
• LM90 lifespan: >90,000 h
• Set weight: 7.95 kg
• Warranty: 3 years

Compatibility

Compatible:

• SANlight extension cable for EVO/Q-Series Gen2 in 1 and 2 m versions or the angled 1 m version for a longer power supply (Wieland RST20i3 connector)
• Power distribution units for connecting additional lights to one power supply: 4-way connector and Wieland splitter
• Dimmers for the blue control connector: Bluetooth Dimmer SANlight or an additional or replacement M-Dimmer instead of the supplied one
• SANlight ratchet hanger as a height-adjustable alternative to the supplied hangers
• Adapters for control via an external controller: GrowControl and Trolmaster

Not compatible:

• EVO Compact 400V wiring and connector (different connector - AC Power Plug 400V, not Wieland RST20i3)
• STIXX range wiring and drivers (different system - M19 5-PIN connector)
• FLEX II power supplies and wiring (different connector - WDC19)

Light included in the set: SANlight EVO 4-80

The heart of the set is one SANlight EVO 4-80 light from generation 1.5. The body measures 643 mm in length and 291 x 116 mm in cross-section, weighs 4.5 kg and emits light at an angle of 90-112°, evenly covering an 80 x 80 cm square. Passive aluminium cooling without a fan operates quietly and keeps the operating temperature at 5-30 °C; IP65 protection and resistance to up to 99% humidity protect the diodes and connectors from dust and splashing water.

What is included

According to the official set specification, you receive everything needed for hanging and connecting it:

• 1x SANlight EVO 4-80 LED light (265 W)
• 1x power cable
• 2x SANlight hangers, each with a load capacity of 34 kg
• 1x SANlight M-Dimmer

The standalone SANlight EVO 4-80 light is sold without wiring; in the set, you receive it with accessories included.

Set 80 vs smaller and larger versions

Compared with the Set 60 (200 W, 60 x 60 cm), you get a more powerful light for a larger area. It is still a solution with one light; once you want to cover 120 x 120 cm or more, sets with two lights and a more even distribution of light are more suitable.

Frequently asked questions

How many lights are in the Set 80?

The set contains one EVO 4-80 light with a power consumption of 265 W and an output of 725 µmol/s, designed for an 80 x 80 cm area. The 4-80 model is a more powerful option than the 3-60 from the smaller set, giving you more light output in a medium-sized tent while retaining the simplicity of installation with one light.

Is the set complete for getting started?

Yes, for basic operation - it includes a power cable, two hangers and a magnetic M-Dimmer; simply hang it and connect it to the mains. You only need to purchase the substrate, fertilisers and, if required, an extract system separately - these are not included in the light set.

How is the light in the set controlled?

Control is handled by the SANlight magnetic M-Dimmer on the blue control connector; you adjust the output in fixed steps. If you prefer control via a phone or central controller, the M-Dimmer can be replaced with a SANlight Bluetooth Dimmer or 0-10V control.