SANlight EVO 5-100 340W LED 3 µmol/J - V1.5

Product detailed description

Professional light for high spaces

SANlight EVO 5-100 is the main LED luminaire in the EVO 1.5 range in the 340 W power class, in a compact 818 mm body. It delivers 915 µmol/s of photon flux and SANlight states a module efficiency of over 3 µmol/J for the EVO range. IP65 protection ensures resistance to dust and splashing water even during intensive operation. It is fitted with red and far-red OSRAM LED chips supplemented by white Seoul Semiconductor diodes (WICOP technology).

Parameters

• Model: SANlight EVO 5-100
• Power input: 340 W
• Photon flux PPF: 915 µmol/s
• Module efficiency: >3 µmol/J
• Spectrum: full spectrum 400-780 nm (blue 16 %, green 37 %, red 43 %, FarRed 4 %)
• LED chips: OSRAM (red and far-red) + Seoul Semiconductor WICOP (white)
• Dimensions: length 818 mm, width 291 mm, height 116 mm
• Weight: 5.6 kg
• Protection: IP65
• Supply voltage: 100-240/277 VAC, 50/60 Hz
• Beam angle: 90-112°
• LM90 lifespan: >90,000 h
• Connector: Wieland RST20i3 (power), separate blue connector (dimming)
• Warranty: 3 years

Compatibility

Compatible:

• Wieland RST20i3 power cables: straight (16151), angled angled (39019), Q-Series (SANACQ)
• EVO/Q-Series Gen2 extension cables (25077 1 m/2 m, 39373 angled 1 m)
• Wieland connector - 4-way distributor (22264) and splitter connector (39725) for powering multiple luminaires
• Dimmers via the blue connector: Bluetooth Dimmer (22261), M-Dimmer (22255)
• Control adapters: GrowControl (N41607), Trolmaster (N41606); blanking plug for unused connector (22267)
• Suspension: ratchet hanger Light Hanger Ratchet (N52170) with a load capacity of 60 kg - universal, independent of the connector

Incompatible:

• EVO Compact 400 V cabling - connector N50243 is for the 400V version of Compact, it does NOT fit these luminaires
• STIXX (M19 5-PIN system) - different connector
• FLEX II (WDC19/WDC21 system) - different connector

Professional light, not for a standard tent

EVO 5-100 is in the 340 W power class and delivers 915 µmol/s in a compact 818 mm body. SANlight developed it for high, open spaces and professional cultivation - for a standard 100x100 cm tent, it recommends two economical EVO 3-100 units rather than this luminaire. Choose the EVO 5-100 where you need high intensity and have the height to use it.

To get it running, you need a power cable

The package does not include a power cable - you choose it according to your installation. Use a straight power cable, or the angled variant when you route the supply close to the body. Both have a Wieland RST20i3 connector for EVO 1.5 and Q-Series Gen2 (an overview of matching and non-matching systems is in the Compatibility section).

Dimming via the blue connector

Next to the power connection there is a separate blue dimming connector on the body. You can connect a Bluetooth Dimmer to it, which you set in the app on your phone, or the magnetic M-Dimmer. For connection into a larger system, an external 0-10V controller can be used via an adapter.

Frequently asked questions

Does the cabling from EVO 5-100 also fit STIXX, FLEX II or EVO Compact?

No. EVO 5-100 uses the Wieland RST20i3 power connector, common to the entire EVO 1.5 and Q-Series Gen2 range. It does not fit EVO Compact in the 400 V version (that one has connector N50243) or the STIXX (M19) and FLEX II (WDC) ranges - they have their own cabling. When buying a cable, stick to the EVO/Q-Series variant.

Is a power cable included with the EVO 5-100 luminaire?

No. SANlight deliberately supplies the EVO 5-100 without a power cable so that you can choose the variant according to your installation. To get it running, you need one power cable with a Wieland RST20i3 connector - straight, or angled when you route the supply close to the body. Both are available from us separately and installation takes a few minutes.

How is the EVO 5-100 dimmed?

The luminaire has a separate blue dimming connector. You can connect the magnetic M-Dimmer or SANlight Bluetooth Dimmer to it, which you control via an app on your phone. Alternatively, you can regulate the EVO 5-100 with an external 0-10V controller via an adapter cable. The power and dimming connectors are two separate sockets.