SANlight FLEX II GST30 power supply 30W including adapter (AI2022)

Product detailed description

The smallest power supply for FLEX II for a single socket

SANlight FLEX II GST30 is a plug-in 30 W power supply that lets you light FLEX II luminaires without complicated installation - plug it into a mains socket, connect the luminaire and switch on the light. The package also includes an adapter cable from the DC connector to the WDC19 connector, so you have everything needed to connect the first FLEX II luminaire together.

Parameters

• Max. power: 30 W
• Input voltage: 230 V AC (EU version)
• Max. current draw: 0.6 A at 230 V AC
• DC output: WDC19 (via the included adapter cable)
• Min. load: 1x FLEX II 10
• Package contents: power supply + end piece + DC/WDC19 adapter cable

Compatibility

Compatible:

• FLEX II luminaires: 3x FLEX II 10, 1x FLEX II 20 or 1x FLEX II 25
• WDC19 splitters and extension cables (the power supply output is WDC19): four-way and two-way WDC19 splitter, T-connector, extension cables
• Adapter cable WDC19/DC - the same type as included, available separately

Incompatible:

• EVO/Q-Series luminaires and cabling (Wieland AC) and STIXX (M19) - different system
• Splitters with WDC21 male connector (for powerful 150/240/320 W power supplies) - different output connector
• SANlight BT-Dimmer and M-Dimmer dimmers - FLEX II has no SANlight dimmer

Entry into the FLEX II system

GST30 is the easiest start with the FLEX II system - ideal for one FLEX II 10 luminaire above a propagator or for a small setup. If you need to power more luminaires, choose the more powerful GST65 or one of the 150 / 240 / 320 W power supplies.

Frequently asked questions

How many FLEX II luminaires can the GST30 power?

The GST30 has an output of 30 W, which is enough for three FLEX II 10 luminaires, or for one FLEX II 20 or one FLEX II 25. Do not connect more luminaires to the power supply than this number states - an overloaded power supply would not light them at full power. For a larger setup, use the GST65 or one of the 150 to 320 W power supplies.

Do I need to buy an adapter for the GST30?

No. The GST30 is supplied including the end piece and the adapter cable from the DC output to the WDC19 connector, so you can connect the first FLEX II luminaire straight away. You will only need to buy additional extension or splitter WDC19 cables if you want to chain the luminaires or place them further away from the power supply.

Can the GST30 be dimmed?

SANlight does not produce any dimmer for FLEX II - the M-Dimmer or Bluetooth Dimmer do not fit this range. The GST30 has a fixed output, so you cannot regulate the intensity with it. Dimming of FLEX II is only possible where the driver supports external 0-10V control, not via this plug-in power supply.