TT 125 U fan, 280 m3/h

Product detailed description

USE:
The Vents TT 125 U fan fully meets the requirements for high pressure and yet low noise. The fan is suitable for spaces with very high humidity such as greenhouses, growing rooms, basements, public toilets, commercial kitchens, archives, etc. Thanks to its technical parameters, it is designed for extraction in duct systems up to 17 metres. This fan with an electronic temperature sensor and controller is used for automatic speed regulation depending on the air temperature in the ventilation duct or inside the room. 

MOTOR:
The single-phase motor with ball bearings has two speeds, which can be switched using an external switch. The motor is equipped with a thermal fuse with automatic restart. IPX4 protection rating.

THERMOSTAT: if the temperature rises by 2 °C above the thermostat set temperature, the fan automatically switches to a higher speed. Once the set temperature is reached, the fan switches back to the lower speed and continues extracting.

INSTALLATION:
The fan can be installed at any point in the duct system - horizontally. In addition, several fans can be mounted at the same time to increase the pressure or capacity of the transported air. The fan body is equipped with a mounting plate for wall fixing.

The fan is supplied including the power cable.

Technical parameters:
- diameter: 125 mm
- air flow: approx. 100-280 m³/h
- ball bearings: yes
- max temperature: 60 °C
- speed: 1060/2500 rpm
- static pressure: 105/138 Pa
- sound pressure: 29/36 dB/1m
- power supply: 230V 50Hz
- power input: 23/37 W
- rated current: 0.19/0.26 A
- protection: X4 IP
- weight: 1.40 kg

You can find the catalogue sheet here.