TT Silent/Dalap AP Quiet 315mm, 1530/1950m3/h

MOTOR:
The single-phase ball bearing motor has two speeds that can be switched using an external switch (not included). The motor is equipped with a thermal fuse with automatic restart. The motor lifetime is around 40,000 hours.

USE:
The Vents TT Silent-M 315 fully meets the demands for high pressure yet low noise. The fan finds its application in areas with high humidity such as toilets, kitchens, offices, greenhouses, grow rooms, etc. Thanks to its technical parameters, it is designed for extraction in ductwork up to 65 metres.

INSTALLATION:
The fan can be installed at any point in the piping system - horizontally. Furthermore, several fans can be installed simultaneously to increase the pressure or capacity of the transported air. The fan body is equipped with a mounting plate for wall or ceiling mounting.

Technical parameters:
- maximum air capacity (power): 1530/1950^m3/h
- low power consumption (power): 213/313 W
- 1975/2545 rpm
- sound pressure level: 36/40 dbA
- optimal operation with ducts up to a maximum length of 65 m
- weight: 25 kg
- protection: IP X4
- max. operating temperature: 60 °C

What is the best use of TT Silent/Dalap AP ducted fans?

All axial duct fans are designed for a wide range of applications in kitchens, apartments, offices, growing rooms and greenhouses. They will also do the job in workshops, cellars and other areas where active ventilation is required. The TT AP 315 can be mounted on a wall or ceiling thanks to the mounting plate. The single-phase motor and ball bearings guarantee maximum performance in both horizontal and vertical positions. The speed can be adjusted either fixed before the fan is started or by means of an external switch, which is not included and must be purchased. Detailed instructions for wiring and use can be found in the English manual.