TT 160 Fan, 467/520 m3/h

Product detailed description

The TT 160 plastic fan has a maximum output of 467/520 m³/h and is designed for ventilation ducts with a diameter of 160 millimetres.

MOTOR:
The single-phase motor with ball bearings has two speeds that can be switched using an external switch. The motor is fitted with a thermal fuse with automatic restart. IPX4 protection rating. 

USE:
The Vents TT 160 fan fully meets the requirements for high pressure and yet low noise. The fan is suitable for use in areas with high humidity such as toilets, kitchens, offices, greenhouses, growing rooms, etc. Thanks to its technical parameters, it is designed for extraction in duct systems up to 29 metres.

INSTALLATION:
The fan can be installed at any point in the duct system - horizontally. In addition, several fans can be mounted at the same time to increase the pressure or capacity of the transported air. The fan body is equipped with a mounting plate for wall fixing.

Technical parameters:
- flow rate: 405/520 m3/h
- max. pressure: 212/280 Pa
- voltage: 230 V
- power input: 30/60 W
- current: 0.24/0.34 A
- protection class (IP): X4
- speed: 1670/2450/min
- operating temperature: max. 60 °C
- noise level: 33/44 dB(A)
- weight: 3 kg
- service life: 40 000 hours

This product is supplied without a power cable, which you can buy here.

You can find the catalogue sheet here.