SANlight EVO 5-150 340W LED 3 µmol/J - V1.5

Product detailed description

Pair for 150x150 cm

SANlight EVO 5-150 is the main LED luminaire in the EVO 1.5 range in the 340 W power class in the longest version - in a pair it covers a large 150x150 cm tent. It delivers 915 µmol/s of photon flux and SANlight states a module efficiency of over 3 µmol/J for the EVO range. IP65 protection ensures resistance to dust and splashing water. It is fitted with red and far-red OSRAM LED chips and white Seoul Semiconductor diodes with WICOP technology.

Parameters

• Model: SANlight EVO 5-150
• Power input: 340 W
• Photon flux PPF: 915 µmol/s
• Module efficiency: >3 µmol/J
• Spectrum: full spectrum 400-780 nm (blue 16 %, green 37 %, red 43 %, FarRed 4 %)
• LED chips: OSRAM (red and far-red) + Seoul Semiconductor WICOP (white)
• Dimensions: length 1318 mm, width 291 mm, height 116 mm
• Weight: 6.4 kg
• Recommended area: 150x150 cm (2 luminaires)
• Protection: IP65
• Supply voltage: 100-240/277 VAC, 50/60 Hz
• Beam angle: 90-112°
• LM90 lifetime: >90,000 h
• Connector: Wieland RST20i3 (power), separate blue connector (dimming)
• Warranty: 3 years

Compatibility

Compatible:

• Wieland RST20i3 power cables: straight (16151), angled angled (39019), Q-Series (SANACQ)
• EVO/Q-Series Gen2 extension cables (25077 1m/2m, 39373 angled 1m)
• Wieland coupler - 4-way distributor (22264) and splitter (39725) for powering multiple luminaires
• Dimmers via blue connector: Bluetooth Dimmer (22261), M-Dimmer (22255)
• Control adapters: GrowControl (N41607), Trolmaster (N41606); blanking plug for unused connector (22267)
• Suspension: ratchet hanger Light Hanger Ratchet (N52170) with a load capacity of 60 kg - universal, independent of the connector

Incompatible:

• EVO Compact 400 V cabling - connector N50243 is for the 400 V version of Compact, it does NOT fit these luminaires
• STIXX (M19 5-PIN system) - different connector
• FLEX II (WDC19/WDC21 system) - different connector

Pair for 150x150 cm

EVO 5-150 stretches 340 W and 915 µmol/s into the longest 1318 mm body. Two EVO 5-150 luminaires cover a large 150x150 cm tent. The shorter 5-120 is for 120x120 cm, while the 5-100 is a professional light for tall open spaces.

To get it up and running, you need a power cable

The package does not include a power cable - you choose it according to your installation. You can use a straight power cable, or the angled variant when you run the supply close to the body. Both have a Wieland RST20i3 connector for EVO 1.5 and Q-Series Gen2 (an overview of compatible and incompatible systems is in the Compatibility section).

Dimming and control

The luminaire is controlled via a separate blue connector. You can attach a magnetic M-Dimmer or SANlight Bluetooth Dimmer with phone control to it, or control it with an external 0-10V controller via an adapter cable. Power and dimming are two separate sockets, do not confuse them.

Arranging multiple luminaires

For large areas, the luminaire is installed in multiple units. To power them from one supply, use a Wieland coupler (4-way distributor), which distributes the mains to individual luminaires. The dimming signal can then be split to all luminaires at once.

Frequently asked questions

Does the cabling from EVO 5-150 also fit STIXX, FLEX II or EVO Compact?

No. EVO 5-150 uses the Wieland RST20i3 power connector, common to the entire EVO 1.5 and Q-Series Gen2 range. It does not fit EVO Compact in the 400 V version (that one has connector N50243) or the STIXX (M19) and FLEX II (WDC) ranges - they have their own cabling. When buying a cable, stick to the EVO/Q-Series variant.

Is a power cable included with the EVO 5-150 luminaire?

No. SANlight deliberately supplies the EVO 5-150 without a power cable so that you can choose the variant according to your installation. To get it up and running, you need one power cable with a Wieland RST20i3 connector - straight, or angled when you run the supply close to the body. Both are available from us separately and installation takes a few minutes.

Can I connect several EVO 5-150 units to one supply?

Yes. In a larger space, EVO 5-150 units are often arranged in rows of two or more side by side. To power them from one supply, use a Wieland coupler (distributor), which splits the mains to several luminaires. You can then dim each one separately, or together via a dimming signal splitter.