Prima Klima fan 760 m3/h, 150 mm, 1-speed (PK150-L)

Product detailed description

Prima Klima PK150-L 760 m3/h, 150 mm - a stronger 150 mm fan with one speed

Do you need to extract more air from a 150 mm fan, but do not want to pay for electronics or switches? PK150-L delivers a solid 760 m3/h through a MES motor with backward-curved blades. It is equipped with a thermal switch against overheating and runs quietly even with a filter.

Basic AC range - why it is more affordable

The model belongs to the basic AC range of Prima Klima. It uses a classic AC motor with an impeller with backward-curved blades and is more affordable than versions with an EC motor. It does not have smooth electronic control - the output runs at a fixed setting, or it switches between fixed speeds. For a lower price, you get a reliable duct fan with quiet operation and low energy consumption.

Key parameters

• Flange diameter: 150 mm
• Max. airflow: 760 m3/h
• Motor: AC MES, one speed
• Impeller: backward-curved blades
• Thermal switch against overheating
• Installation: horizontal and vertical

Matching with the filter and ducting

Always choose the same diameter for the fan, filter flange and ducting - in this model, 150 mm. A carbon filter increases the resistance of the system, so size the fan with a reserve above the needs of the growing space and match the filter and ducting to the same 150 mm diameter. Mismatched diameters otherwise add unnecessary resistance, reduce performance and increase noise.

For which space

It is aimed at a medium grow room with a filter. If a lower extraction rate is enough at a lower price, there is the PK150-A 600 m3/h; those who want to switch day/night will choose the PK150-2 two-speed.

What to buy with the fan

For odour extraction, fit a Prima Klima carbon filter 150 mm. The fan is supplied without a power cable; to control the speed, add an external speed controller. You can find the range in the single-speed fans category.

Frequently asked questions

Is a power cable included in the package?

No, the fan is supplied without a cable. A flex cable 3x1.5 mm with an end fitting is suitable, for example.

How does it differ from the PK150-A?

The PK150-L has a higher extraction rate of 760 m3/h compared with 600 m3/h for the PK150-A. Both are single-speed with the same 150 mm flange.

Can it be controlled?

Yes, via an external speed controller. The fan itself runs at one fixed speed.

Not sure about choosing the size or matching it with the filter? We can advise you at info@higarden.cz or at the shop in Prague.