Lumatek LED Full-Spectrum 100W BAR 2.9

Product detailed description

Lumatek LED Bar 100W Full Spectrum - supplementary LED bar with its own driver

Lumatek LED Bar 100W Full Spectrum is a standalone full-spectrum LED light bar that lets you illuminate areas with insufficient light - the edges of the tent, the lower levels of plants, or the sides. It delivers PPF 295 µmol/s at a power draw of 102 W, i.e. a high efficiency of 2.9 µmol/J, and has its own 100W driver, so it works completely independently of the main light. It is fitted with Osram and Lumileds diodes, and the Clear Glue protective cover transmits over 99% of the light, so there is practically no loss of output on the cover.

Parameters

• Efficiency: 2.9 µmol/J
• PPF: 295 µmol/s
• Power draw: 102 W (0.5 A @230V)
• Voltage: 220-240V, 50-60Hz
• Spectrum: full spectrum (Full Spectrum F)
• Diodes: Osram and Lumileds
• Beam angle: 120 degrees
• Protective cover: Clear Glue, light transmission over 99%
• Dimensions: 1148 x 20 x 53 mm
• Weight: 1.1 kg
• Protection rating: IP65
• Lifespan: L90 over 60,000 h
• Driver: standalone Lumatek 100W LED remote driver included
• Control: OFF-25-50-75-100% with 0-10V dimmer (sold separately)
• External control: Lumatek Control Panel Plus 2.0 or universal 0-10V
• Daisy chain: yes
• Warranty: 5 years

Where to place the LED bar

The LED bar is suitable wherever the main panel lacks reach - on the ceiling to boost intensity, on the sides, or underneath to illuminate lower levels. Thanks to its low weight of 1.1 kg and IP65 protection, you can place it practically anywhere. You can also use it on its own as a light for seedlings and cuttings.

Accessory for Zeus panels

The bar uses the same 100W LED bar technology as the Zeus series panels, but it is an independent light with its own driver - so you connect it without interfering with the main Zeus 600W PRO 3.1 panel. Lumatek recommends at least 2 pieces for even illumination of an area of 1.5 x 1.5 m. Timing and dimming of multiple LED bars at once is provided by the Digital Panel Controller PLUS 2.0.

Frequently asked questions

What is the supplementary LED bar suitable for?
It illuminates areas that the main panel cannot reach - the edges of the tent, the lower levels of plants, or the sides. You can place it on the ceiling, on the side, or underneath. It also serves on its own as a light for seedlings and cuttings. It delivers PPF 295 µmol/s and a full spectrum suitable for the entire cycle.

Do I need a separate ballast for the LED bar?
No, the standalone Lumatek 100W LED driver is included in the package, so the LED bar works independently once connected to the 220-240V mains. Only the 0-10V dimmer is sold separately if you want to adjust brightness - without it, the LED bar shines at full power.

How many LED bars should I add to the Zeus 600W panel?
Lumatek recommends at least 2 pieces for the Zeus 600W PRO panel for even illumination of an area of 1.5 x 1.5 m. For smaller panels, 1 piece is enough; for larger areas, the number increases. LED bars can be daisy-chained, so you can connect them and control them together.