Lumatek LED Zeus 600W PRO 3.1 µmol/J

Product detailed description

Lumatek Zeus 600W PRO 3.1 - professional LED panel without compromise

Lumatek Zeus 600W PRO 3.1 is a full-spectrum LED grow light for experienced growers who want to get maximum light from a single tent while using as little electricity as possible. The panel delivers a PPF of 1990 µmol/s at a real power consumption of 640 W, corresponding to an outstanding efficiency of 3.1 µmol/J - more usable light for every watt than less efficient panels with the same power rating. The light is produced by high-quality Osram and Lumileds diodes with a wide 120° beam angle.

Specifications

• Efficiency: 3.1 µmol/J
• PPF (photosynthetic photon flux): 1990 µmol/s
• Real power consumption: 640 W (2.9 A @230 V)
• Voltage: 220-240 V, 50-60 Hz
• Diodes: Osram and Lumileds
• Beam angle: 120°
• Spectrum: full spectrum (Full Spectrum F) for growth and flowering
• Recommended coverage: 1.5 x 1.5 m (Lumatek specification)
• Dimensions: 1182 x 1091 x 52 mm
• Weight: 13.5 kg
• Protection rating: IP65
• Service life: L90 over 60,000 h
• Control: OFF-25-50-75-100 %, 0-10 V dimmer included
• External control: Lumatek or universal 0-10 V controllers
• Construction: 6 replaceable magnetic 100 W PRO 3.1 LED light bars, daisy-chain
• Certifications: CE, EMC, LVD
• Warranty: 5 years

Replaceable LED bars instead of replacing the entire light

When one segment eventually reaches the end of its service life, you only replace the specific LED bar, not the entire panel. Zeus consists of six separate magnetic 100 W PRO 3.1 LED bars that can be removed from the frame without tools. This is also practical for maintenance and cleaning - and above all, it extends the real service life of the entire investment.

Diodes and even light across an area of 1.5 x 1.5 m

The panel is fitted with Osram and Lumileds diodes with a 120° beam angle, so the six LED bars distribute light across the entire area without weaker edges; Lumatek specifies recommended coverage of 1.5 x 1.5 m for this model. If you want to illuminate lower levels or the edges, you can supplement the panel with additional LED bars Lumatek LED Bar 100W - Lumatek recommends at least 2 units for an area of 1.5 x 1.5 m. For a smaller area of 1.2 x 1.2 m, the less powerful sibling Lumatek Zeus 465W PRO 3.1 with the same efficiency is suitable.

0-10 V control and automation

The included 0-10 V dimmer regulates output in steps of 25, 50, 75 and 100 %, allowing you to adapt the intensity to the growth stage and save energy. Via the 0-10 V interface, you can connect the panel to the Lumatek Digital Panel Controller PLUS 2.0 or a universal controller and automate timing, ramp-up and dimming.

Why the higher class is worth it

An efficiency of 3.1 µmol/J means that you get more light for the same power consumption than with cheaper panels with the same power rating - the difference adds up with every hour of operation throughout the entire growing cycle. Add to this the replaceable LED bars, passive silent cooling, IP65 protection rating and a 5-year warranty from Lumatek. It is not the cheapest panel, but it is a panel you will not need to worry about for years.

Frequently asked questions

What size area is the Zeus 600W PRO 3.1 suitable for?
Lumatek specifies recommended coverage of 1.5 x 1.5 m for this model. The actual area depends on the growth stage and hanging height - during the vegetative stage, the light covers a larger area at lower intensity, while during flowering the panel is positioned lower over a smaller area at higher intensity. Separate 100 W LED bars can be added to illuminate the edges.

Which diodes does the Zeus 600W PRO 3.1 use?
The panel is fitted with Osram and Lumileds diodes from the latest chip range, with a 120° beam angle. Together, they create the Full Spectrum F spectrum for growth and flowering, while the wide angle ensures even light distribution across the entire area. The six magnetic LED bars therefore illuminate the canopy without weaker edges.

Can just one light bar be replaced?
Yes, that is what makes Zeus practical. The panel consists of six separate magnetic 100 W PRO 3.1 LED bars that can be removed from the frame without tools. When one segment reaches the end of its service life or needs cleaning, you only deal with that specific LED bar, not the entire light - saving both money and time.

Which timer should be used with the panel?
The panel has an integrated driver, so the timer must switch the live conductor - some timers that switch only the neutral conductor may not be suitable for LED lights; check suitability with the supplier. For lights from 600 W upwards, it also depends on whether the timer can handle the driver's inrush current. Therefore, check the specific model according to its rated inrush current, or use a controller.