Aqua Master Tools EC metre E300 PRO (EC, temperature) for substrate

Product detailed description

The E300 Pro device is ideal for measuring EC and temperature in coco substrate and other moist, soft substrates and liquids. The metre has a modern and robust housing with easy-to-use buttons. The E300 Pro includes an EC electrode of exceptional quality. The metre is supplied fully calibrated and includes batteries.

How the Aqua Master Tools E300 metre works:
1. Connect the PIN connector of the electrode to the EC metre.
2. Rinse the electrode with running water and dry it with clean kitchen paper.
3. Press the on/off button to switch the metre on.
4. Place the electrode into the (soft) substrate (make sure the substrate is well soaked/moist, otherwise the metre will not work properly) or into the liquid being measured.
5. Wait until the value stabilises. The measurement is now complete.
6. Press the HOLD button to save the measurement. When using the metre again, remember to press the HOLD button again.
7. After use, rinse the electrode with clean water so that no residue remains on it.
8. Press the on/off button to switch the metre off.

Measuring range:
- EC: 0.0 ~ 19.9 mS/cm
- temperature 0°C ~ 50°C (32°F to 122°F)

Resolution:
- EC: 0.1 mS/cm
- temperature: 0.1 ºC (0.2 ºF)

Accuracy:
- EC: ± 2 % (4 mS/cm)
- temperature: ±0.5 °C
- temperature compensation: 0.5 ±5 °C 0°C - 50°C (32°F - 122°F)

Other features:
- calibration: 1-point 1.4 EC
- optimal operating temperature: 0°C ~ 50°C (32°F ~ 122°F)
- battery indicator: Yes
- automatic switch-off after 8 minutes
- IP 65
- dimensions 220x40x40 mm
- weight 171 g

This package contains:
- contains: 1 x digital EC/temperature metre for substrates E300 Pro
- 1 x user manual (NL + EN + DE)

All Aqua Master Tools replacement probes are compatible with version 2.0.

Calibration is recommended approximately once a month.
For each calibration, use sterile EC 1.413 μS/cm calibration solution.