Aqua Master Tools EC metre E60 PRO 2.0 (EC, ppm, TDS, Temperature)

Product detailed description

Aqua Master Tools E60 PRO 2.0 combines EC, TDS, PPM and temperature in one handheld metre. It is suitable when you do not want to monitor only conductivity in mS/cm, but also need to compare PPM or TDS values used in some dosing charts.

What the E60 PRO 2.0 measures

• EC in the range 0.00 to 19.99 mS/cm,
• TDS in the range 0.00 to 14.00 PPT,
• PPM in the range 0 to 14000 PPM,
• temperature in the range 0 to 50 °C.

When using PPM, always check which scale your chart or fertiliser uses. The PPM value itself is not universal without the scale context, which is why for comparison it is best to stick to EC in mS/cm.

Calibration and care

The metre comes calibrated from the factory, so you can measure the first solution without delay for initial setup. EC calibration is manual and can be carried out using a suitable EC calibration solution. For standard setup, EC 1.413 calibration solution is suitable; for higher ranges you can also use EC 12.88 solution. After 30 days, the device reminds you to calibrate. The electrode is replaceable: when it wears out, fit a new one and the metre body keeps working. And if you forget to switch the pen on after measuring, it switches itself off after eight minutes of inactivity.

Package contents

• E60 PRO 2.0 EC metre
• replaceable EC electrode
• 2x AAA 1.5 V batteries (included)
• rubber grip with loop for the cap
• user manual

Parameters

• EC range: 0.00 to 19.99 mS/cm
• TDS range: 0.00 to 14.00 PPT
• PPM range: 0 to 14000 PPM
• Temperature range: 0 to 50 °C
• EC/TDS/PPM accuracy: ±2 % F.S.
• Protection rating: IP67
• Automatic shut-off: after 8 minutes
• Dimensions: 220 x 43 x 43 mm
• Weight: 132 g

When to choose the E60 PRO 2.0

Choose it if you want more data than with a simple EC metre. For EC and temperature alone, the E50 PRO 2.0 is enough; for measuring directly in moist substrate, the substrate E300 PRO 2.0 with an electrode on a cable is more practical.

Frequently asked question

Is the E60 PRO 2.0 a pH metre?

No. The E60 PRO 2.0 measures EC, TDS, PPM and temperature. pH needs to be measured with a separate pH metre or a combined pH/EC device.