AutoPot Easy2grow 4 pots incl. 47 L plastic tank

Product detailed description

AutoPot Easy2grow for 4 pots - 47 L tank, weeks without attention

Do you need reliable irrigation for 4 plants that you can leave on its own even while on holiday? AutoPot Easy2grow for 4 square 8.5 L pots with a 47 L tank is among the most water-efficient irrigation systems in the world. The set is compact and mobile - you can easily move it to a windowsill, balcony or small tent. 2 AQUAvalve valves always serve a pair of pots, so you can leave the plants unattended for weeks. The system is fully modular and you can expand it at any time with the Extension Kit.

With this set, the investment pays back in saved work: instead of daily watering, gravity takes care of 4 plants. You do not need electricity, timers or pumps, and the distribution does not need flushing because fertiliser does not build up in it.

How the irrigation works

Each pair of pots shares one tray (2Pot tray) and is controlled by one AQUAvalve valve. After connection to the tank, the valve opens the supply and lets the tray fill with water to the preset level - purely by gravity, without pumps, mains pressure, electricity or timers. Until the plants use the water from the tray, AQUAvalve does not allow any further refill. The plants therefore go through a wet and dry cycle that supports healthy roots; after the tray empties, the process repeats.

Recommended substrates

Easy2grow pots always require a freely draining substrate. These 50/50 mixes have proven effective:

• Mix of soil and perlite - 50/50
• Mix of soil and expanded clay - 50/50
• Mix of coconut fibre and perlite - 50/50
• Mix of coconut fibre and expanded clay - 50/50
• Mix of Rockwool and expanded clay - 50/50

If you use expanded clay, rinse the pebbles with water first - some types are not pH stable and may raise the pH of the water in the tray. Before placing the pots into the tray, clean the bottom and sides of substrate off them; this will maintain the correct function of the AQUAvalve valve.

Tank setup and start-up

Place the tank (47 L tank) at least 150 mm above the highest AQUAvalve valve. If the water level drops to 1/3 of the original volume, top it up - and never let the tank run completely dry. After planting, water the plants and let them root for 7-10 days; only then start the system. A stronger root system will then take care of the water from the tray itself. The square base of the 8.5 L pots fits well into the tray, and a set of two pots on one tray saves space in a row.

Mineral and organic fertilisers

You can dose mineral and organic fertilisers through the tank and distribution. With organic fertilisers, also add a water pump to the tank (run for 15 min every 2 h) so that nutrients do not settle, and each time you empty the tank flush the distribution and clean the tank, pump and filter. With mineral fertilisers, operation is the simplest and maintenance-free.

Care of the AQUAvalve valve

AQUAvalve is a simple but very effective device that requires careful handling - keep the valve and tray clean and free of obstructions. At the end of the season, wash the valve in warm soapy water (an old toothbrush helps). Push through limescale in the nozzle with a paper clip or blow it out; never clean it with a drill - you would destroy the valve. The silicone on the upper float must sit parallel to the opening; check this at eye level.

Package contents

• 1x 47 L tank
• 2x easy2grow module (4x 8.5 L pot, 2x Easy2grow tray, 2x Easy2grow lid)
• 2x package for Easy2grow (AQUAvalve5, PotSock Square, marix disk, tubing, grommets and connectors)
• instructions for use

Expansion and accessories

You can expand the system over time with the easy2grow Extension Kit (two 8.5 L pots), add replacement pots as a 8.5 L pot, and find missing parts in the accessory box for 12 pots. For a cleaner tray and healthy roots, choose the PotSock Square, a copper sleeve for the bottom of a square pot; for seedlings and early stages, the propagation cover is suitable.

Which size to choose

This set serves 4 plants. Nearby sizes: a smaller set is available as the Easy2grow Kit for 2 pots; a larger one as Easy2grow for 6 pots. The body of the system is the same in all sizes; only the number of modules and tank volume differ - browse the entire easy2grow range.

Frequently asked questions

Why two pots on one valve?

The Easy2grow set shares one tray and one AQUAvalve valve for two plants. This gives it the lowest price and water consumption per plant of the entire AutoPot range, and it takes up less space in a row.

Which substrate is suitable for Easy2grow?

Always a freely draining 50/50 mix - soil/perlite, soil/expanded clay, coconut/perlite, coconut/expanded clay or Rockwool/expanded clay. Permeability is key for alternating the wet and dry cycle.

Can I use organic fertilisers?

Yes. Dose organic nutrients with a water pump in the tank (run for 15 min every 2 h) and each time you empty the tank flush the distribution and clean the tank, pump and filter. With mineral fertilisers, operation is maintenance-free.

Not sure about the size or assembly? We will advise you at info@higarden.cz or in the shop in Prague.