Autopot Easy2Grow pack

Product detailed description

Easy2grow pack - AQUAvalve5 accessory pack (9 mm)

Service fittings pack for one Easy2grow system module. It contains an AQUAvalve5 valve and 9 mm distribution to replace a worn part or expand the system - it is not a complete module (without pot and tray).

Package contents

• 1x AQUAvalve5 cam
• 1 m 9 mm hose
• 2x textile pad
• 2x copper sleeve (PotSock Square)
• 1x 9 mm T-piece
• 1x 16-9 mm T-piece
• 1x 16-9 mm cross
• 1x manual

The exact contents of the pack for this SKU are still being confirmed with the manufacturer.

Compatibility

The pack is designed for the Easy2grow system with an AQUAvalve5 valve and 9 mm distribution. It is used to restore or add one module and to convert an older 6 mm system to AQUAvalve5: faster, 66% higher watering supply, lower maintenance requirements.

Mineral and organic fertilisers

You can dose mineral and organic fertilisers through the tank and distribution. With organic fertilisers, also add a water pump to the tank (run for 15 min every 2 h) so the nutrients do not settle, and each time you empty the tank, flush the distribution and clean the tank, pump and filter. With mineral fertilisers, operation is the simplest and maintenance-free.

Upgrade from 6 mm

If you are converting an old system with a 47 l tank (6 mm) to AQUAvalve5, enlarge the existing holes to 12.5 mm; then connect the 9 mm irrigation through the 9 mm grommet and 9 mm golf filter. The same applies to old Tray systems and AQUAbox Straight and Spyder. 6 and 9 mm cannot be connected directly, only via a 16 mm backbone with a reducer.

What next

The pack belongs to the Easy2grow system. You can add the pot as a replacement pot, the tray as a tray, and individual fittings can be found among 9 mm parts and 16 mm parts.