Proguard Defender DXB Mini with BPI, for 23 m2

Product detailed description

The active air purifier ProGuard Defender DXB 100 with BPI was designed and engineered to provide effective disinfection in spaces of approx. 23 m2 with a height of 3-3.6 m.

ProGuard Defender DXB 50 Mini with BPI demonstrably eliminates surface and airborne pathogens 24 hours a day, 7 days a week. For an area smaller than 15 m2, it is recommended to use a plug-in timer and not run ProGuard continuously.

It reduces the occurrence of mould, fungi, bacteria, viruses and other dangerous pathogens.

The ProGuard™ sanitation process combines PCO and BPI
1. ProGuard uses patented photocatalytic oxidation (PCO) technology, which uses energy to activate a catalyst and converts moisture into dry hydrogen peroxide and other disinfecting elements that continuously clean the space 24 hours a day.
2. By creating plasma with an extremely high content of both positive and negative charges, BPI (bipolar ionisation) ions effectively destroy germs, including mould, fungi, viruses and bacteria. It also cleans the air by causing particles to clump together and fall to the floor.

How to install and use the ProGuard purifier in the growing space:
- always install the ProGuard device close to the air intake and far from the air extract from the grow room
- however, do not place it closer than approx. 1 m from the fan; only this will ensure proper and gentle dispersion of the disinfectant
- the unit can be installed on a wall or suspended from the ceiling - the air outlet opening must face downwards, the filters will be at the top right and left
- ProGuard purifiers must not come into contact with water
- do not install them near lighting
- installation should take no more than a few minutes

Maintenance and operation
The air filters should be replaced every 3-4 months or as needed so that the inside of the unit remains clean. This varies depending on the environment. In clean grow rooms, replacement is usually sufficient approximately once every quarter. Disconnect the device from the mains, simply remove the unit cover, easily slide out the filter and insert a new one.
For optimum performance, the PCO BPI Kit for air cleaning must be replaced every 12 months, because UV radiation degrades over time and the cell becomes clogged with foreign substances. You can easily replace it according to the instructions in the user manual. If you do not replace the cell annually, the device will become ineffective.

A safe pathogen destroyer that is harmless to health
The ProGuard device has been tested and verified by renowned laboratories around the world to ensure safety and effectiveness in reducing mould, fungi, bacteria, viruses and other dangerous pathogens threatening cultivation. It uses an "organic" process that is completely safe for occupied environments. Laboratory tests have shown that the technology does not create undesirable or harmful chemical substances. It is completely safe for people, animals and plants.
It does not in any way damage the properties of plants (taste, scent, terpene content, etc.).

Specifications:
- coverage: 23 m2
- unit weight: 1.4 kg
- dimensions (H x L x W): 26x23.5x7.6 cm
- supply voltage / input: 100-240VAC / 15W
- operating voltage/amps: 24VDC / 0.77A
- energy consumption: Operating power 14W - 22W
- warranty: 2 years