AC Infinity Duct Carbon Filter, Australian Charcoal, 2122 m3/h, 250 mm

Product detailed description

When a 200 mm system is no longer enough

AC Infinity DCF10 has a 250 mm flange and is designed for grow rooms and large grow tents, where the maximum flow rate of a 200 mm filter (DCF8, 770 CFM / 1308 m3/h) is no longer sufficient for the required air volume. The filter captures odours and chemicals from extracted air during long-term operation.

Carbon filling and flow rate

The filter filling consists of Virgin Australian activated carbon (Virgin Australian RC412) with a rating of 1200+ IAV in a 38 mm layer. The maximum air flow rate is 1249 CFM (2122 m3/h) - significantly more than with the 200 mm DCF8 filter.

Construction

The flange is made of aluminium and is reversible on both sides - by turning the filter around, you can use the entire carbon filling. The mesh is made of corrosion-resistant galvanised steel.

What's included

• 1x DCF10 carbon filter
• 2x strap
• 2x rope clip hanger
• 2x washable pre-filter

Neck diameter: 250 mm | Filter length: 61.0 cm | Overall dimensions: 60.0 x 32.6 cm | Flange length: 3.8 cm

Fan for a 250 mm system

Pair the DCF10 filter with a fan and ducting of the same diameter, 250 mm. Activated carbon in the ducting creates resistance and reduces the actual flow rate of the system - therefore, choose a fan with capacity above the space's requirements:

• AC Infinity CLOUDLINE S10 - fan with a 10-step speed controller, 250 mm.
• 250 mm flexible four-layer ducting - connects the filter to the fan.

Frequently asked questions

When does it make sense to switch from a 200 mm to a 250 mm filter?
If the air volume you need to filter exceeds the capacity of a 200 mm filter (DCF8, 770 CFM / 1308 m3/h) - typically in larger grow rooms and large tents.

Which fan is the DCF10 filter suitable for?
It has a 250 mm flange and is suitable for the CLOUDLINE S10 fan of the same diameter.

Must the filter have the same or a higher flow rate than the fan?
Do not assess this based on the filter rating. The 250 mm CLOUDLINE fan has a stated maximum flow rate of 1201 CFM (approximately 2040 m3/h), while the DCF10 has 1249 CFM (2122 m3/h) - the values are close. The filter in the ducting also reduces the actual flow rate of the system due to carbon resistance, so choose a fan with reserve capacity.

Is the filter flange reversible?
Yes, the aluminium flange is reversible on both sides, allowing you to turn the filter around and use the entire carbon filling.