Fan TT 100 U, 187 m3/h with thermostat

Product detailed description

The TT 100 U plastic fan with a maximum output of 187 m³/h is designed for ventilation ducts with a diameter of 100 millimetres. Among the main advantages of this product is an electronic temperature sensor, which ensures automatic speed regulation depending on the air temperature.

MOTOR:
Single-phase motor with ball bearings. The motor is fitted with a thermal fuse with automatic restart. IPX4 protection rating.

USE:
The Vents TT 100 U fan fully meets the requirements for high pressure and yet low noise. The fan is suitable for spaces with very high humidity such as greenhouses, growing rooms, cellars, public toilets, commercial kitchens, archives, etc. Thanks to its technical parameters, it is intended for extraction in duct systems up to 10 metres. This fan with an electronic temperature sensor and controller is used for automatic speed regulation depending on the air temperature in the ventilation duct or inside the room.

THERMOSTAT:
If the temperature rises by 2 °C above the thermostat set temperature, the fan automatically switches to a higher speed. Once the set temperature is reached, the fan switches back to a lower speed and continues extracting.

INSTALLATION:
The fan can be installed at any point in the duct system - horizontally. In addition, several fans can be mounted at the same time to increase the pressure or capacity of the transported air. The fan housing is equipped with a mounting plate for wall fixing.

The fan is supplied including the power cable.

Technical parameters:
- maximum air capacity (output): 187 m³/h
- consumption (input): 33 W
- 2500 rpm
- pressure: 135 Pa
- sound pressure level: 35 dbA
- compatible with round ducting with a diameter of 100 mm
- weight: 1.4 kg
- protection: IP X4
- max. operating temperature: 60 degrees
- for ducting with a maximum length of 17 m

Here you will find the catalogue sheet.