TD Mixvent 2000/315 3V three-speed fan

Product detailed description

The TD-2000 cabinet is made of galvanised steel sheet with an epoxy coating. The cabinet consists of a mounting rail with two spigots and a motor, which is connected to the spigots by quick-release clamps. The design allows the motor section to be removed without disconnecting the ducting. Fan motors TD-500 to TD-2000 have triple winding. The terminal block is located on the fan housing; on some types it contains a starting capacitor.
For motors with triple winding, the speed is switched in three stages using COM 3 or INT 4P controllers, or voltage control can be used with REB controllers (continuous control) or REV (five-stage control).

Fan installation is possible in any fan position. The housing must not transmit mechanical stress from the ductwork. A flexible connection to the duct must be used.

Parameters:
- air flow: 1830/1630/1430 m³/hod
- speed: 2630/2420/2130 ot./min
- duct diameter: 315 mm
- power: 290/223/173 W
- voltage: 230V
- current: 1.03/0.79/0.64 A
- protection rating: IP44
- max. temperature: -40 to +60 °C
- weight: 14 kg

Operating instructions here: TD instructions
Product information catalogue: TD catalogue

Dimensions (in mm):

*you can find the fan drawing in the photo gallery