TR20 - Step-less Voltage Regulator 2200W

Code: TR20
Brand: Malapa
€99,90
tr20 regulator napeti plynuly 2200w na plochu
€99,90 €74,95 €61,94 excl. VAT
In Stock
Delivery offer

The TR20 regulator can smoothly regulate inductive and resistive voltage on a scale from 0% to 100%. Using the simple knob, you can set the maximum speed for a ventilator, light, drill or other appliance with power up to 2200W (9,5A). It's possible to set the lowest possible speed. The device has a durable plastic casing to guarantee long-term, seamless operation even in extreme conditions.

Detailed information

Product detailed description

The TR20 regulator can smoothly regulate inductive and resistive voltage on a scale from 0% to 100%. Using the simple knob, you can set the maximum speed for a ventilator, light, drill or other appliance with power up to 2200W (9,5A). It's possible to set the lowest possible speed. The device has a durable plastic casing to guarantee long-term, seamless operation even in extreme conditions. The device has its own safety fuse.

The TRIAC regulator can control an electromotor, dim/regulate lights (light bulbs, HID lamps), ventilator/fan, heater, and drill with axial, radial and diagonal engines.

TR20 Specification:
- max. load: 2200W
- step-less regulation: 0% - 100%
- power input: 230V, AC, 50Hz
- installation: attaches to a wall
- operating temperature: from -20° to 70°C
- input power cable length: 3 m
- built-in fuse: 16A
- total weight: 603 g
- size: 110 x 110 x 60 mm
- ingress protection: IP44 (resistant to splashing water)
- casing: ABS RoHS

Installation: attaches to a wall using the included bracket

If you have any questions, contact us at info@higarden.eu.

Additional parameters

Category: Speed Controllers
Outlets: 1x
Connection: 1x Socket 230V
Speed control according to: Continuous regulation only
PFHGX: Levné, Nejprodávanější, Doporučené, Kvalitní, Značkové, Základní

Be the first who will post an article to this item!

Only registered users may post articles. Please log in or register.

Do not fill out this field: