GSE Step Regulator 2.5 A – Humidity/Temperature/Hysteresis – for 2 Fans

Product detailed description

GSE Step transformer 2.5 A can regulate two fans according to the temperature and humidity in the room and the set hysteresis. The device is not complicated to operate and has just four knobs for setting the desired temperature (20–30 °C) and humidity (30–100%) in the room, which the controller is to maintain. Hysteresis can be set for both values (2–8 °C / 6–30%), indicating when the fans should switch on. 

GSE Step transformer regulates the fans in six steps. The intake fan always runs one step behind the extract fan, thereby preventing odours from escaping.

The step controller is ready for use and the package includes a probe for measuring temperature and humidity. The probe has a four-metre cable, so it can also be placed further away from the controller. Another advantage is the IP54-rated casing, which is resistant to dust and water, so you do not have to worry about it even in the humid environment of a grow room.

The temperature sensor measures temperatures ranging from –55 to +125 °C with an accuracy of 0.5° in the range from –10° to +80 °C. The sensor measures humidity with an accuracy of 4.5% relative humidity.

Specifications:
- device dimensions: 200 x 250 x 180 mm
- packaging dimensions: 265 x 300 x 205 mm
- intended for: 2.5 A (for 2 fans)
- primary voltage: 230 V / 50 HZ
- secondary voltage: 80 V, 110 V, 140 V, 170 V, 200 V, 230 V
- 5 V digital sensor measures temperatures from –55 °C to +125 °C
- temperature measurement accuracy: 0.5 °C (at temperatures from –10 °C to +85 °C)
- humidity measurement range: 0–100%
- humidity measurement accuracy: +/-4.5% Rh
- ingress protection rating: IP54