Aqua Master Tools Replacement electrode for EC meter E50 PRO (6-pin)

Product detailed description

The E50 EC metre measures the strength of the solution using a sensor at the tip, and that sensor is replaceable. The AMT1006 replacement electrode restores measurement functionality to the metre you already own – you do not need to buy a new device.

Which metre it is for

The sensor is designed for the E50 PRO 2.0 and the older E50 PRO. Aqua Master Tools sensors are always made for one metre range; this one carries article number AMT1006 and belongs to the E50 range.

How the conductivity sensor measures

Conductivity is not the same as pH: the sensor measures how well the solution conducts an electric current and uses this to determine the concentration of dissolved salts. It cannot measure acidity, so you will need a pH metre for that.

Rinse instead of storage solution

Preservation solution is not used for a conductivity sensor; it is intended for the reference element of pH probes. Instead, after removing the sensor from the nutrient solution, rinse it with clean water, wipe it and leave it dry until the next measurement.

Warranty

Aqua Master Tools covers the sensor with a 6-month warranty from the date of purchase; any warranty claim must be made within this period.

Specifications

• Type: replaceable conductivity and temperature sensor
• Designed for: E50 PRO, E50 PRO2
• Article: AMT1006
• Storage: dry, without solution
• Warranty: 6 months

Frequently asked questions

Will the sensor fit the E60 conductivity metre too?

No. The E50 and E60 models each have their own spare part from Aqua Master Tools; this one is listed as AMT1006. The difference between the metres is not limited to the sensor: in addition to conductivity, the E60 also displays PPM and TDS. Therefore, always order according to the type marked on your device.