Maxibright Daylight LED 200W 2.3 umol/J

Product detailed description

Maxibright Daylight 200W: entry-level LED for an 80x80 cm tent

Maxibright Daylight 200W is a full-spectrum grow LED light for growers who want to light up an 80x80 cm tent without complicated wiring and without noise. The integrated dimmer and passive cooling make it an easy entry into LED growing - no external ballast, no fan, just hang it up and plug it into the socket. It delivers 460 µmol/s of full spectrum including Far-Red, so it guides the plant through the entire cycle from seedling to harvest.

Quiet passive cooling and full spectrum

Passive cooling means the fixture has not a single moving part - there is nothing to seize up and it does not hum in your tent. The aluminium body dissipates heat without a fan, so it is easier to maintain the temperature in the tent and you place less load on the extract. The full spectrum including Far-Red guides the plant through the entire cycle from seedling to harvest, so you do not need to change the lights during cultivation. With an efficiency of 2.3 µmol/J, the Daylight 200W is among the most affordable full spectrum LED panels you can buy, and a lifespan of 50000 h with a 3-year warranty means that one purchase price will last you for many growing cycles ahead.

Integrated dimmer for every growth stage

You adjust the intensity directly on the fixture in five steps: 20/40/60/80/100 %. Give seedlings and fresh cuttings gentler 20-40 %, add more in the vegetative stage to 60-80 %, and run at full power for flowering. You do not need any external controller or extra wiring for this - the dimmer is part of the panel.

Parameters

• Power input: 200 W
• Luminous flux (PPF): 460 µmol/s (tested at 22 °C)
• Efficiency: 2.3 µmol/J
• Spectrum: full, including Far-Red
• Recommended area: 80x80 cm
• LED chips: LUMLED
• Dimming: integrated, 20/40/60/80/100 %
• Cooling: passive, without fan
• Dimensions: 508x508x80.6 mm
• Weight: 3.9 kg
• Power supply: 230 V, 50/60 Hz, current 0.96 A
• Operating temperature: -20 to +40 °C
• Lifespan: 50000 h
• Warranty: 3 years

200W, or 300W?

Daylight 200W is one of the most affordable grow LED lights and covers an 80x80 cm tent. If you have a 100x100 cm area, choose the more powerful sibling Daylight LED 300W with the same efficiency of 2.3 µmol/J and the same controls - it differs only in power and coverage size. Those growing in a more humid space or wanting a remote dimmer and IP65 protection will find them in the Daylight PRO range.

Frequently asked questions

What size tent is Daylight 200W enough for?

The fixture is light-optimised for an 80x80 cm area, which corresponds to a smaller grow tent for one to several plants. For this area it delivers 460 µmol/s of full spectrum. If you are planning a 100x100 cm tent, choose the 300W version instead, which has a correspondingly higher luminous flux for a larger area.

Does Daylight 200W need an external ballast or controller?

No. Daylight 200W has the dimmer integrated directly into the body and is powered from a standard 230 V socket, so you do not need to buy any external ballast or controller. Hang the fixture on the supplied brackets, plug it into the mains and set one of the five power levels from 20 to 100 %. One person can install it.

Is passive cooling sufficient, or does the fixture overheat?

Passive cooling is fully sufficient for the 200W panel. The aluminium body dissipates heat without a fan, so the fixture runs quietly and has no moving part that could fail. The operating temperature range is -20 to +40 °C. The lower thermal load also makes it easier to maintain the temperature in the tent.