Maxibright Daylight LED 300W 2.3 umol/J

Product detailed description

Maxibright Daylight 300W: affordable LED for a 1x1 m area

Maxibright Daylight 300W is a full-spectrum grow LED light for growers who want to reliably illuminate a 100x100 cm area without noise and without an external ballast. It delivers 690 µmol/s of full spectrum including Far-Red, carries plants through the entire cycle from seedling to harvest, and thanks to the integrated dimmer and passive cooling you only need to hang it up and plug it into the socket. An efficiency of 2.3 µmol/J makes it one of the most affordable choices for a 1x1 m tent.

Full spectrum and even diode placement

LUMLED diodes are evenly distributed across the entire surface of the fixture, so balanced light falls on the 1x1 m area without hot spots that could burn plant tops. The full spectrum with an enhanced red and Far-Red component supports healthy growth and abundant flowering, so you do not need to change the light source during the cycle.

Quiet operation without a fan

Passive cooling means a design without a fan and without moving parts - the fixture runs completely silently and there is nothing to break down. Compared with a discharge lamp, the LED delivers more light per watt and less waste heat, so you place less load on the extract and can maintain the temperature in the tent more easily. A service life of over 50000 h and a 3-year warranty ensure long-term return on investment.

Integrated dimmer for every stage

You can set the intensity directly on the fixture in five steps: 20/40/60/80/100 %. Give young seedlings 20-40 %, increase to 60-80 % during vegetative growth, and run at full power during flowering. The dimmer is part of the panel, so you do not need an external controller or any additional wiring.

Parameters

• Power input: 300 W
• Light output (PPF): 690 µmol/s
• Efficiency: 2.3 µmol/J
• Spectrum: full, including Far-Red
• Recommended area: 100x100 cm
• LED chips: LUMLED
• Dimming: integrated, 20/40/60/80/100 %
• Cooling: passive, without fan
• Dimensions: 558x558x90 mm
• Weight: 5.3 kg
• Power supply: 230 V, 50/60 Hz
• Service life: more than 50000 h
• Warranty: 3 years

Standard, PRO, or the smaller 200W?

The Daylight 300W in the standard version is the most affordable way to get full spectrum on a 1x1 m area. If you grow in a more humid space or want higher efficiency, a remote dimmer and IP65 protection, choose the Daylight PRO 300W version with an efficiency of 2.5 µmol/J. If you have a smaller 80x80 cm tent, the cheaper sibling Daylight LED 200W with the same efficiency and control is enough.

Frequently asked questions

What area is the Daylight 300W sufficient for?

The fixture is optimised for a 100x100 cm area, i.e. a standard 1x1 m grow tent. On this area it delivers 690 µmol/s of full spectrum. For a smaller 80x80 cm tent, the more economical 200W version is more suitable, while for a more humid environment or higher efficiency the PRO range with IP65 protection is better.

What is the difference between the Daylight 300W and the PRO version?

The standard Daylight 300W has an efficiency of 2.3 µmol/J, an integrated dimmer and passive cooling. The PRO version offers a higher efficiency of 2.5 µmol/J, IP65 protection against moisture and dust, and a remote dimmer. The standard model is the more affordable choice, while the PRO is suitable for more demanding conditions and for situations where you want to control the output remotely.

Does the Daylight 300W need an external ballast?

No. The fixture has the dimmer and power supply integrated into the body and plugs directly into a 230 V socket. So you do not need to buy any external ballast or controller. You hang the fixture on the supplied brackets, plug it into the mains, and one person can handle the installation.