SunPro HITTER 720W ECO, LED 2.6 umol/J

Product detailed description

SunPro HITTER 720W ECO, LED 2.6 µmol/J is a full-spectrum LED light from the SunPro HITTER ECO range with a declared PPF light output of up to 1872 µmol/s and a fixture efficiency of 2.6 µmol/J. The diodes are protected by double protection - they are embedded in clear resin as standard, and are additionally covered by a polycarbonate cover resistant to moisture and the demanding conditions of the growing environment.

Key features

• Light output: PPF up to 1872 µmol/s
• Efficiency: 2.6 µmol/J
• Spectrum: full spectrum
• LED chip protection: double - resin + polycarbonate cover
• Ballast: integrated, installed in the metal frame of the fixture
• Control: manual 4-step adjustment with a control element on the structure
• Connectivity: 2× RJ11 port for linking and controlling multiple units with one controller or an external controller
• Protection rating: IP44
• Dimensions: 1110 × 1065 × 38 mm
• Warranty: 2 years, guaranteed one-to-one replacement

Construction and installation

The SunPro HITTER LED is a fully assembled fixture ready for immediate connection (plug and play) - after unpacking from the box, nothing needs to be assembled. The integrated ballast is part of the metal frame, so there is no need to connect external components.

Package contents

• SunPro HITTER 720W ECO
• power cable
• 2× hangers
• RJ11 connecting control cable

Recommended use

For proper operation, we recommend using ZSD16 digital timers, which switch off the phase (live wire) in accordance with the standards valid in the Czech Republic and other European countries. Timers that switch off the neutral wire instead of the phase may cause unwanted glowing of the LED diodes. You can also use one of the offered digital controllers for control.

Frequently asked questions

Is an external ballast required?

No, the ballast is integrated directly into the metal frame of the fixture - just plug it into the mains.

What is the warranty?

2 years with guaranteed one-to-one replacement in the event of a functional fault.

Can multiple lights be controlled at once?

Yes, thanks to the two RJ11 ports, multiple units can be linked and controlled by one controller or an external controller.

Which timer should be used?

We recommend ZSD16 digital timers, which switch off the phase (live wire) according to the standards valid in the Czech Republic and the EU - other types of timers may cause the LED diodes to glow.