Atami ATA Tables

How should fertilisers from the ATA product range be dosed? Here is a proven method!

• It is advisable to apply the individual fertilisers from this product range to plants through watering in synergistic combinations. We therefore provide recommended combinations, as they say, what with what and how much of each.
• The first four tables are devoted to growing in soil, which is why the main fertiliser here is ATA Terra, which stands on its own in the first table as well. The next four red tables are devoted to growing in coco. Here, the two-component fertiliser ATA Coco Max A+B takes the lead. In the blue table, it is Awa A+B again.
• And it is precisely to the above-mentioned “main elements” of each of these combinations that, in most tables, a second key product is assigned in addition to other supplementary fertilisers. In the case of the ATA product range, this is either Rootbastic as a high-quality root stimulator, or Bloombastic, which represents a perfect combination of minerals and stimulators specially tuned for the flowering and ripening phase. Some tables then work with a combination of both of these products together with the main fertiliser.

Looking for dosing tables for another fertiliser range?
- Atami ATA NRG (Organics)
- Atami B´cuzz

SOIL

ATA Terra

• ATA Clean, a biological cleaning agent for irrigation systems, should be applied in the same way throughout the entire growing cycle, at a rate of 0.05 – 0.1 ml. The only exception is the flush in the tenth week.

Week 1-2

• Apply the easily absorbable growth fertiliser ATA Terra Leaves (1 – 5 ml).
• For better development of the plant’s root system, use Atami ATA Rootfast at the same time, in the same amount (1 – 5 ml).

Week 3-9

• Replace the products from the first two weeks with the following, which should be applied in the recommended amount until the end of week 9.
• Mineral fertiliser Atazyme (1 – 3 ml).
• From the third week onwards, it is time to use ATA Terra Max as well (1 – 5 ml).
• The plants will thrive better if you also add ATA XL (1 – 1.5 ml) to the watering solution.
• From the fifth week onwards, do not forget 1 – 2 ml of Atami PK 13-14.

Week 10

• Flush the plants with clean water and look forward to a successful harvest. 

ATA Terra + Bloombastic

• ATA Clean, a biological cleaning agent for irrigation systems, should be applied in the same way throughout the entire growing cycle, at a rate of 0.05 – 0.1 ml. The only exception is the flush in the tenth week.

Week 1-2

• Apply the easily absorbable growth fertiliser ATA Terra Leaves (1 – 5 ml).
• For better development of the plant’s root system, use Atami ATA Rootfast at the same time, in the same amount (1 – 5 ml).

Week 3-9

• Replace the products from the first two weeks with the following, which should be applied in the recommended amount until the end of week 9.
• Mineral fertiliser Atazyme (1 – 3 ml).
• From the third week onwards, it is time to use ATA Terra Max as well (1 – 5 ml).
• From the sixth week onwards, it is time to add Bloombastic (0.5 – 1 ml) to the watering solution as well! 

Week 10

• Flush the plants with clean water and look forward to a successful harvest.

ATA Terra + Rootbastic

• ATA Clean, a biological cleaning agent for irrigation systems, should be applied in the same way throughout the entire growing cycle, at a rate of 0.05 – 0.1 ml. The only exception is the flush in the tenth week.

Week 1-2

• Apply the easily absorbable growth fertiliser ATA Terra Leaves (1.5 – 3 ml).
• In this case, the high-quality root stimulator Rootbastic plays a crucial role; apply 0.1 ml in the first week and double the dose for the second week.

Week 3-9

• Apply Rootbastic until the end of the third week. The recommended dose for the third week is 0.3 ml.
• Replace ATA Terra Leaves with the following products, which should be applied in the recommended amount until the end of week 9.
• Mineral fertiliser Atazyme (1 – 3 ml).
• From the third week onwards, it is time to use ATA Terra Max - gradually increase the dose from the fifth week of the growing cycle according to the table up to 5 ml.
• The plants will thrive better if you also add ATA XL (1 – 1.5 ml) to the watering solution.
• From the fifth week onwards, do not forget 1 – 2 ml of Atami PK 13-14.

Week 10

• Flush the plants with clean water and look forward to a successful harvest.

ATA Terra + Rootbastic + Bloombastic

If you choose this maximally synergistic combination, omit ATA XL and ATA PK 13-14. Keep Terra Leaves and Atazyme, and during the growing cycle apply Rootbastic and Bloombastic according to the table, just as in the combinations above.

Products Atami ATA

COCO

ATA Coco Max A+B

• ATA Clean, a biological cleaning agent for irrigation systems, should be applied in the same way throughout the entire growing cycle, at a rate of 0.05 – 0.1 ml. The only exception is the flush in the tenth week.

Week 1-2

• Apply the two-component fertiliser for growing in coco ATA Coco Max. The dosage applies equally to both components (3.5 – 4 ml) and remains the same until the end of the growing cycle (except for the flush in week 10).
• For better development of the plant’s root system, use Atami ATA Rootfast at the same time (0.5 – 1 ml).

Week 3-9

• Replace Rootfast with the following trio of products, which should be applied in the recommended amount until the end of week 9.
• Mineral fertiliser Atazyme (1 – 3 ml).
• The plants will thrive better if you also add ATA XL (1 – 1.5 ml) to the watering solution.
• From the fifth week onwards, do not forget 1 – 2 ml of Atami PK 13-14.

Week 10

• Flush the plants with clean water and look forward to a successful harvest.

Coco Max A+B + Bloombastic

• ATA Clean, a biological cleaning agent for irrigation systems, should be applied in the same way throughout the entire growing cycle, at a rate of 0.05 – 0.1 ml. The only exception is the flush in the tenth week.

Week 1-2

• Apply the two-component fertiliser for growing in coco ATA Coco Max. The dosage applies equally to both components (3.5 – 4 ml) and remains the same until the end of the growing cycle (except for the flush in week 10).
• For better development of the plant’s root system, use Atami ATA Rootfast at the same time (0.5 – 1 ml). 

Week 3-9

• Replace Rootfast with mineral fertiliser Atazyme (1 – 3 ml).
• From the third week onwards, it is time to use ATA Terra Max as well (1 – 5 ml).
• From the sixth week onwards, it is time to add Bloombastic (0.5 – 1 ml) to the watering solution as well! 

Week 10

• Flush the plants with clean water and look forward to a successful harvest.

Coco Max A+B + Rootbastic

• ATA Clean, a biological cleaning agent for irrigation systems, should be applied in the same way throughout the entire growing cycle, at a rate of 0.05 – 0.1 ml. The only exception is the flush in the tenth week.

Week 1-2 

• Apply the two-component fertiliser for growing in coco ATA Coco Max. The dosage increases at the turn of the fifth and sixth week (from 1 – 3 ml to 3 – 4 ml).

• In this case, the high-quality root stimulator Rootbastic plays a crucial role; apply 0.1 ml in the first week and double the dose for the second week. 

Week 3-9

• Apply Rootbastic until the end of the third week. The recommended dose for the third week is 0.3 ml.
• From the third week onwards, also add ATA Zyme and ATA XL to the watering solution according to the table. 
• From the fifth week onwards, also apply ATA PK 13-14 according to the table.

Week 10

• Flush the plants with clean water and look forward to a successful harvest.

COCO Max + Rootbastic + Bloombastic

If you choose this maximally synergistic combination, omit ATA XL and ATA PK 13-14. Keep Atazyme and during the growing cycle apply Rootbastic and Bloombastic according to the table, just as in the combinations above.

Products Atami ATA

HYDROPONICS

ATA Awa

• ATA Clean, a biological cleaning agent for irrigation systems, should be applied in the same way throughout the entire growing cycle, at a rate of 0.05 – 0.1 ml. The only exception is the flush in the tenth week.

Week 1-2

• Apply the two-component fertiliser for the vegetative period ATA Awa Leaves (1 – 4 ml).
• For better development of the plant’s root system, use Atami ATA Rootfast at the same time, in the same amount (1 – 5 ml).

Week 3-9

• Replace ATA Rootfast with the following products, which should be applied in the recommended amount until the end of week 9.
• Mineral fertiliser Atazyme (1 – 3 ml).
• From the third week onwards, it is time to use ATA Awa Max (2 – 4 ml).
• The plants will thrive better if you also add ATA XL (1 – 1.5 ml) to the watering solution.
• From the fifth week onwards, do not forget 1 – 2 ml of Atami PK 13-14.

Week 10 

• Flush the plants with clean water and look forward to a successful harvest.

Products Atami ATA