AC Infinity Flexible Four-Layer Ducting, 7.62m, 100mm

Product detailed description

Longer route for 100mm ventilation

The 7.62 m length is suitable where a short 2.44 m hose is not enough - routing air through a wall, to a window, into an adjacent room, or over a longer distance between the fan and the filter. Any excess length can be cut to size, so even on a long route the hose does not remain unnecessarily coiled. Compatible with 100mm fans and filters.

Four-layer construction

The inner layer consists of durable double aluminium foil with a fire-resistant treatment, while the outer layer is double PVC thermoplastic, which protects the aluminium against cutting, tearing and prevents air leakage at the joint. Inside the tube is a steel wire spiral, which makes the hose flexible and easy to install even in hard-to-reach places.

Straight route even over long distances

Even with a length of 7.62 m, it pays to route the hose as straight as possible - according to the manufacturer's ventilation sizing data, a 30° bend reduces the actual airflow of the assembly by approximately 20% and a 90° bend by up to 60%. The fewer bends on the route, the more of their performance the fan and filter retain.

Package contents

• 1x flexible four-layer ducting, 100 mm x 7.62 m
• 2x stainless steel hose clamp

Choose the matching fan, filter and accessories (100 mm)

• CLOUDLINE A4 - basic quiet fan with cable controller.
• CLOUDLINE S4 - more powerful fan, 10-step controller.
• CLOUDLINE T4 - fan with VPD controller Controller 69 Pro included in the package.
• DCF4 carbon filter - removes odours from the extracted air.
• Stainless steel hose clamps 100 mm (2 pcs) - additional clamps for further joints in the route.
• The same ducting in a 2.44 m length - for compact installation in one tent.

Frequently asked questions

When should I choose the 7.62 m length instead of the shorter 2.44 m?
When the hose needs to run over a longer distance - through a wall, to a window, into the next room, or when you want a reserve for future ventilation rearrangement. Any excess length can be cut off.

Will a longer route and bends reduce ventilation performance?
Yes - according to the manufacturer's sizing data, a 30° bend reduces airflow by approx. 20% and a 90° bend by up to 60%. It pays to route the hose with as few bends as possible.

How many hose clamps are in the package?
Two stainless steel hose clamps - typically one for the joint with the fan and the second for the joint with the filter. For an assembly with additional joints, clamps can be purchased separately.