AC Infinity Flexible Four-Layer Ducting, 7.62 m, 200 mm

Product detailed description

200 mm ducting only in one length

With a diameter of 200 mm, we supply this flexible ducting in a length of 7.62 m - it will cover a longer route in larger tents and rooms, and if you need a shorter connection, simply cut the hose to size. Compatible with 200 mm CLOUDLINE S8 and T8 fans and the DCF8 filter.

Four-layer construction

The inner layer is made of durable double aluminium foil with a fire-resistant finish, while the outer layer is made of double PVC thermoplastic, which protects the aluminium against cutting and tearing and prevents air leakage. A steel wire spiral inside the tube gives the hose flexibility and makes installation easier even in hard-to-reach places.

Bends reduce performance

According to the manufacturer's sizing data for ventilation, a 30° bend reduces the actual airflow of the assembly by approximately 20%, and a 90° bend by up to 60%. With the larger air volume carried by a 200 mm assembly, a straight route with a minimum of bends is especially worthwhile.

Package contents

• 1x flexible four-layer ducting, 200 mm x 7.62 m
• 2x stainless steel hose clamp

Choose the matching fan, filter and accessories (200 mm)

• CLOUDLINE S8 - fan with 10-speed controller.
• CLOUDLINE T8 - fan with Controller 69 Pro VPD controller included.
• DCF8 carbon filter - removes odours from extracted air.
• 200 mm stainless steel hose clamps (2 pcs) - additional clamps for extra connections.
• 200 mm pre-filter (2 pcs) - replacement set for the DCF8 filter.

Frequently asked questions

Do you also have 200 mm ducting in a shorter length?
We offer 200 mm ducting in a length of 7.62 m. For a shorter installation, simply cut it to the required length.

Which fan and filter are suitable for this ducting?
CLOUDLINE S8 or T8 fans and the DCF8 carbon filter (or the XL version) - all in the same 200 mm diameter.

How much does a bend reduce ventilation performance?
A 30° bend by about 20%, a 90° bend by up to 60% according to the manufacturer's sizing data - therefore it is worth routing the hose with as few bends as possible.