Trolmaster 240V Temperature Device Station (DST-2E) + adapter

The picture is illustrative. The product is supplied in the EU version including an adapter for seamless connection to the Czech network.

The TrolMaster DST-2 temperature control modules allow the user to easily connect and control standard heating or cooling equipment to the Hydro-x system. This module allows control of any heating or cooling device to world standard voltage (100-240 VAC, 50/60 Hz), up to 10 amps.

Status LED:

• * Flashes green FAST: If the LED flashes fast, it means that the module has not been addressed to the controller OR that the module does not have a good connection to the controller.
• * Press the small button on the module to address/connect the module when it is first installed.
• * Slowly blinking green SLOW LED: If you see a slowly blinking green LED, it means that the module is addressed and connected to the controller and the module is currently powered off.
• * SLOW GREEN: If you see the LED steady on (not flashing), it means the modules are addressed, connected and currently on.
• * Flashing Red: If the LED changes to flashing red, it means the module is overloaded. To reset the overload, disconnect the module from power.
• * By pressing and holding the button on the DST-2 module, users can manually reconfigure and turn the module on/off.

Main advantages:

• LED power indicator
• RJ12 cable socket
• Addressing
• Plug & Play

Package Includes:

• 1 x Device Station
• 1 x 16ft RJ12 Cable
• 1 x 4ft RJ12 Cable
• 1 x RJ12 T-Splitter

.