MTC1 - digital thermostat timer (heating or cooling)

Product detailed description

MTC1, digital timer thermostat (heating or cooling) 
This digital thermostat is primarily designed for switching an appliance off or on according to the set value in °C and time. The THERMOSTAT is used for switching or controlling appliances depending on temperature (more info on Wikipedia.cz). In the menu, you can choose socket (output) control for heating (increasing temperature) or air conditioning (cooling, lowering temperature). Using the time base, you programme a different temperature for day and a different temperature for night (2 programmes/ 24 hours). Adjustable temperature 0° to 80°C. Adjustable hysteresis 1° to 10°C. MTC1 is designed for a load (appliance) of up to 3000W. 
The clear 2-line LCD display informs you simultaneously about temperature, time and output (socket) status. The processor continuously monitors inputs, outputs and the connection to the sensor and, if necessary, signals an error visually and additionally acoustically. Setting backup. Temperature is measured by the precise and reliable digital DALLAS sensor, which transmits information via a 1.5 metre cable extension. Immediate installation, a 3 metre power cord with plug is used for connection to the mains, and a socket is used for connecting the device. You can mount the device on the wall using hanging brackets (included). Long-term and faultless operation even under extreme conditions, over design. 

use of the MTC1 thermostat: 
Device for controlling heating or air conditioning (cooling), fan (extract/intake air), underfloor heating, warm-air distribution... 
In the spaces of a family house, workplace, warehouse, workshop, hall, greenhouse, garage, boiler room, cellar, botanical garden, greenhouse, animal breeding and other buildings... 

main functions of the thermostat: 
- maximum load of connected appliance 3000W 
- LCD display, 2 lines, 3 control buttons 
- heating/ air conditioning selection (switching and breaking contact) 
- clock, 2 programmes for day 
- temperature adjustable 0° to 80°C 
- hysteresis adjustable 1° to 10°C 
- temperature sensor on a 1.5 metre cable 
- power cord terminated with plug, 3 metres long 
- socket (output) on the body of the device 
- surface installation of the device, fixing material in the package 
- simple and quick assembly 

advantages: 
It remembers the settings even after a power interruption, quick changes in settings and precise measurement of all values, minimal consumption, continuous temperature without fluctuations, pleasant climate, lower mechanical/ thermal stress on mechanical parts, high protection rating of the device, communication with the sensor takes place at safe voltage. An appliance that is not running does not consume any electrical energy either. 

installation: 
The sensor on the cable can measure the temperature in a different space or in the air duct than where the device is located. In the space, we recommend placing the sensor approx. 1.5m above the ground in a place with good air circulation, do not place the sensor near heat emitters. 

hysteresis: 
temperature difference or inertia, when the device switches on and off 
heating - e.g. if the hysteresis is 1°C, the required temperature is 20°C, the thermostat switches off at 21°C and switches on again at 20°C 
cooling - e.g. if the hysteresis is 1°C, the required temperature is 20°C, the thermostat switches off at 19°C and switches on again at 20°C 

at your request, we can also supply other variants, write to us at info@malapa.cz or simply add a note when placing the final order in the "checkout": 
- adjustment of sensor length 
- higher switching/ controlled power 
- adjustment of the range of values 




technical data MTC1: 
power supply - 230V AC 50Hz 
maximum load - resistive 3000W (13A) 
maximum load - inductive 460W (2A) 

temperature sensor - digital 
calibrated - by DALLAS manufacturer 
sensor length - 1.5 metres 
sensor size - diameter 10mm x 60mm 

LCD display - 2 lines 
control button - 3x (+ - SET) 
number of programmes - 2 programmes/ 24 hours 
output - heating/ air conditioning (NO/ NC) 
temperature range - 0° to 100°C 
working temperature of sensor - 0° to 80°C 
temperature hysteresis - 1° to 10°C 
temperature tolerance +-0.25°C 
time tolerance +-2 minutes/ month 
time backup - accumulator 100 hours 
data backup - 35 years 
protection - thermal, electronic 
menu - Czech (on request Germany, English, Spain) 
protected by fuse 
power cord with plug - 3 metres 
mounting - wall/ surface (brackets) 
total weight - 3170 grams 
size - length 170, width 120, height 85mm 
working temperature -20° to 70°C 
working humidity - 0% to 90%RH (non-condensing) 
storage temperature - 0° to 45°C 
protection rating - IP44 
case - ABS 
RoHS