AC Infinity CLOUDFORGE T3, Environmental Plant Humidifier, 4.5 L, Smart Controls, Targeted Vaporising
Code: AC-CFT3



Related products
Product detailed description
Compact humidifier for small grow spaces
AC Infinity CLOUDFORGE T3 is a next-gen EC ultrasonic vaporiser for grow spaces, with smart controls and targeted vapour distribution. Its body is specially sealed to prevent water leaks, which is especially useful in smaller tents where the device is close to plants and electronics. The tank holds 4.5 L of water, and at maximum capacity the humidifier can run for up to 45 hours without refilling.
Humidity control
The onboard smart controller with a wired probe (3.66 m) measures humidity and automatically starts humidification according to the set target value. The device itself has 4 digital misting levels (10 with a UIS controller) and timers for scheduled operation. The backlit display shows the current humidity and can be switched off so it does not disturb plants during the dark period. Settings are saved in backup memory; after a power cut, the humidifier restarts automatically and switches off automatically when the water runs out. Place the probe near the plants, not in the mist stream.
Targeted vapour distribution
The package includes a flexible hose that extends from 73 to 210 cm, allowing you to direct vapour exactly where it is needed — especially useful in smaller tents where space needs to be used strategically. Thanks to the hose and wired probe, you can also place the humidifier outside the tent; interchangeable nozzles direct the mist in one direction or over a wider area.
Part of the UIS platform
CLOUDFORGE T3 can connect to UIS controllers, such as CONTROLLER AI+ or CONTROLLER 69 PRO, and be integrated into a wider system with other grow equipment — with dynamic triggers, grow cycles and schedules. As part of the UIS platform, it is controlled via the AC Infinity app over WiFi (through a UIS controller), with charts and alerts.
Package contents
- 1× CLOUDFORGE T3 humidifier with 4.5 L tank
- 1× flexible hose
- 1× sensor probe
- 1× probe holder
- 1× UIS extension cable, male–male
- 1× misting nozzle cleaning brush
- 1× hook-and-loop straps
Specifications
- Tank volume: 4.5 L
- Max. runtime: 45 hours
- Misting output: approx. 240 ml/h
- Misting levels: 4 on the device, 10 with a UIS controller
- Noise level: 38 dBA
- Power consumption: 24 W
- Current: 0.10 A (at 230 V)
- Voltage: 100-240 V AC, 50/60 Hz, EU plug
- Operating temperature: 5-50 °C
- Operating humidity: 30-85 % RH
- Dimensions: 17.2 x 17.2 x 35.7 cm
- Flexible hose: 73–210 cm
- Sensor probe: 3.66 m
- Power cable: 2.42 m
When to choose the T3 and when to choose a larger model
The T3 is suitable for smaller tents. The CLOUDFORGE T7 has a larger 15 L tank and an output of approx. 1300 ml/h. If you need to increase or reduce humidity in your tent, read the article humidifier or dehumidifier; VPD and transpiration explains VPD.
Frequently asked questions
How does the humidifier know when to start misting?
The onboard controller with a wired probe measures humidity and automatically starts humidification according to the set target value; you can also set a timer.
How long does one tank fill last?
Up to 45 hours with the 4.5 L tank.
Can the T3 be controlled via a mobile app?
Yes, as part of the UIS platform, the T3 can connect to a UIS controller and be controlled via the AC Infinity app over WiFi. With a UIS controller, you also get 10 humidification levels, climate-based triggers, grow cycles and schedules.
Additional parameters
| Category: | Humidifiers |
|---|---|
| EAN: | 819137023611 |
| blogpost Climate control: VPD and transpiration: | /vpd-about-2/ |
| blogpost Humidifier or dehumidifier?: | /zvlhcovac-ci-odvlhcovac-2/ |
| blogpost AC Infinity for your grow tent: what works with what: | /ac-infinity-pruvodce/ |
| blogpost AC Infinity Growbox Kits: Setups by Tent: | /ac-infinity-sestavy-podle-stanu/ |