Urban Heater tubular heater 55W with continuous regulation

Product detailed description

The tubular heater with smooth regulation Urban Heater 55W is intended mainly for growers and keepers of smaller animals.
Heating is suitable for cultivation in greenhouses, grow tents and other growing spaces.

You will use it especially when caring for seedlings and cuttings in winter and the colder months.

Main advantages:
- maintains a constant temperature
- requires almost no maintenance
- supplied including brackets for wall or floor installation
- safety fuse against overheating
- low consumption
- high IP55 protection

Technical specification:
- Power input: 55W
- Length: 510 mm
- Protection: IP44
- 220-240V, 50 Hz

When and why to use heating in indoor cultivation?
Note that it is not possible to state exactly how long it will take and to what temperature you will heat the growing space. The manufacturer does not provide this information. This is because the final temperature is affected not only by the heater's power input itself, but also by the initial temperature and, above all, the size of the space. The ambient temperature and how well the interior space is thermally insulated also have an effect.

If the initial temperature inside the growing tent 100x100x200 cm (space 2 m3) is, for example, 10° C and you want to raise it to 20° C, it will take some time depending on the conditions. If you want to heat a grow box 200x200x200 cm (space 8 m3) from 10° to 20° C, with the same output it will take approximately 4x longer. With heating of a lower power input, you will most likely not manage it at all.

In addition, when growing, it is not necessary to heat the entire space to maximum all the time.

The most important thing is a constant temperature around the plants themselves. That is why heating elements are used mainly to maintain a stable temperature.

What never to do with the Urban Heater:
- do not switch it on until it is perfectly installed
- use it out of reach of children and pets
- do not handle it if the heater is connected to the mains
- do not immerse it in water
- do not leave the cable draped over the heating element
- do not install the heater near flammable and combustible objects
- if it is not in use, disconnect it from the mains
- for cleaning, use only a damp clean cloth
- further instructions can be found in the manual included in the download files