BioNova Nutri Forte A+B

Product detailed description

BioNova Nutri Forte A+B is a complete, highly concentrated and very cost-effective nutrient solution designed specifically for growing plants in hydroponic systems. This two-part fertiliser covers all the needs of annual plants from the growth stage through to a bountiful harvest, making it one of the simplest and most effective solutions on the market.

Key features and benefits

• Complete nutrition: a single product for the entire growing cycle - from growth to bloom.
• Extreme concentration: a dilution ratio of 1:600 ensures maximum efficiency and low operating costs.
• Food-grade quality: contains minerals in their purest form, which plants can absorb immediately and completely.
• For clean systems: minimal ballast salt content prevents clogging of capillary and irrigation systems.
• Stable pH: chelated trace elements are available to plants across a wide pH range.
• Universal use: ideal for all types of inert substrates, such as rockwool, expanded clay, perlite and others.

Perfect control over nutrition

The composition of Nutri Forte A+B is based on minerals in so-called food-grade quality. This means that the plant can use them immediately without any further processing, giving you, as the grower, perfect control over the supplied nutrition. This allows you to respond quickly to the needs of plants and ensure optimal conditions for them.

All key trace elements (such as boron, calcium, magnesium, iron, manganese and zinc) are in chelated form. This form ensures that the nutrients remain available to the plant even if the pH in the growing medium fluctuates slightly. In addition, the product contains no unnecessary additives that could burden the plant or the growing system.

Instructions for use

Using the fertiliser is very simple and intuitive. Always use both components, A and B, in the same ratio.

• Dosage: mix 9-18 ml of component A and 9-18 ml of component B per 10 litres of water. Use at every watering.
• Mixing: first add component A to the water and mix thoroughly. Then add component B and mix again. Never mix the concentrates directly together.
• pH adjustment: after mixing, check the pH of the resulting solution. The ideal value for hydroponics is in the range of 5.5-6.5 (optimally 5.8).
• Use: apply from the first week of growth until one week before harvest.
• Flushing: one week before harvest, stop fertilising and water only with clean water. This step is key to a clean taste and harvest quality.

Solving nutrient deficiencies

Nutri Forte A+B can also be used as a quick aid when signs of nutrient deficiency appear in the form of a foliar spray. For this purpose, mix 2.5-10 ml of fertiliser per 10 litres of water.

• In the case of a deficiency of nitrogen (N), calcium (Ca), magnesium (Mg) or iron (Fe), apply only component A as a spray.
• In the case of a deficiency of phosphorus (P), potassium (K) or sulphur (S), apply only component B as a spray.

Tips for maximum results

To achieve truly professional results and a synergistic effect, we recommend combining Nutri Forte A+B with other BioNova products. Consider adding stimulators such as PK 13-14 to support flowering or X-cel Booster to maximise yields. Do not forget that the basis of success is always optimal growing conditions, such as plenty of light, fresh air and quality plant genetics.

Parameters

• Fertiliser type: two-part (A+B), organo-mineral
• Growing stage: growth and bloom
• Growing method: hydroponics, aeroponics
• Substrates: rockwool, expanded clay, perlite and other inert media
• NPK (A): 8-0-0
• NPK (B): 0-6-12
• Dosage: 9-18 ml / 10 l water
• Concentration: 1:600

Frequently asked questions

Is Nutri Forte A+B suitable for coco or soil as well?

It is intended primarily for hydroponics and inert substrates (rockwool, expanded clay, perlite). For coco, use Coco Forte A+B, for soil Soil Supermix.

Why add PK 13-14 when A+B covers the whole cycle?

PK 13-14 additionally supplies phosphorus and potassium for a richer flower set - BioNova recommends it throughout the flowering phase together with the main fertiliser.

How can overfertilisation be prevented when mixing components A and B?

Apply 9-18 ml of each component per 10 l of water, never mix the concentrates directly together and check the pH after mixing (ideally 5.8, range 5.5-6.5).

Exact dosage can be found in the BioNova dosage table.