Complete Irrigation Kit + MJ1000 Pump for Atami WILMA XXL 16

Product detailed description

Irrigation kit for Wilma XXL in a dense 16-pot configuration (16 x 11 L). The MJ1000 submersible pump with a flow rate of 1,000 L/h supplies 16 plants from the 150 L reservoir at once – designed for intensive production on a 115 x 115 cm tray.

Which system it belongs to

Wilma is a recirculating drip system: the submersible pump pushes the solution through the distribution hose to the drippers, with one dripper for each pot, while excess solution flows down the gravity tray and back into the reservoir. The kit corresponds to the Wilma XXL 16 x 11 L system (115 x 115 cm tray, 150 L reservoir). The distribution system is prepared for 16 drippers, one for each pot.

What the kit contains

The kit contains a distribution hose, drip lines with drippers and an MJ1000 submersible pump (flow rate 1,000 L/h, delivery head up to 1.5 m). The reservoir, gravity tray and pots are not included in the kit – they are listed as separate parts. Choose the drippers according to the substrate: blue Flood for expanded clay, rockwool or Mapito (fast flow), and black Arrow for coco, Copito or soil (slow dripping).

Frequently asked questions

When does the irrigation switch on, and is a timer included?

The timer is not included in the kit – Wilma requires one for switching. A 15-minute segment timer is a proven choice. Young plants need just 1–2 irrigation cycles per day with half-strength nutrients, while mature plants need a maximum of one cycle per hour during the light phase. The substrate should never be allowed to dry out completely.

Further spare parts for Wilma systems can be found in the Atami Wilma Accessories category.