Autopot, 1Pot XL accessory pack

Product detailed description

1Pot XL pack - AQUAvalve5 accessory pack (9 mm)

Service fitting pack for one module of the 1Pot XL system. It contains an AQUAvalve5 valve and 9 mm distribution to replace a worn part or expand the system - it is not the complete module (without pot and tray).

Package contents

• 1x AQUAvalve5 cam
• 1 m 9 mm hose
• 1x textile pad
• 1x copper pad (XL root control disc)
• 1x 9 mm T-piece
• 1x 16-9 mm T-piece
• 1x 16 mm connector 2x 9 mm branch
• 1x manual

Compatibility

The pack is designed for the 1Pot XL system with an AQUAvalve5 valve and 9 mm distribution. It is used to restore or add one module and to convert an older 6 mm system to AQUAvalve5: faster, 66% higher nutrient supply, lower maintenance requirements.

Mineral and organic fertilisers

You can dose mineral and organic fertilisers through the tank and distribution. With organic fertilisers, also add a water pump to the tank (run 15 min every 2 h) so the nutrients do not settle, and each time you empty the tank, flush the distribution and clean the tank, pump and filter. With mineral fertilisers, operation is the simplest and maintenance-free.

Upgrade from 6 mm

If you are converting an old system with a 47 l tank (6 mm) to AQUAvalve5, enlarge the existing holes to 12.5 mm; then connect the 9 mm irrigation through a 9 mm grommet and 9 mm golf filter. The same applies to old Tray systems and AQUAbox Straight and Spyder. 6 mm and 9 mm cannot be connected directly, only via a 16 mm main line with a reducer.

What next

The pack belongs to the 1Pot XL system. Add the pot as a replacement pot, the tray as a tray, and the roots are protected by a PotSock. You can find individual fittings among 9 mm parts and 16 mm.