Ventilator VK 315 U, 1340 m3/h with thermostat

Product detailed description

Single-phase asynchronous motor with external rotor and overheating protection. The motor has ball bearings and a permanent grease fill for its entire service life. Insulation class II and protection rating IPX4.

Given its technical parameters, it is intended for use over medium distances of around 45 metres. The fan is designed for extracting air from small and medium-sized rooms such as bathrooms, showers, kitchens, greenhouses, cinemas, cottages, shops and anywhere you need high pressure and low noise at the same time.
The fan is designed for installation in both rigid and flexible ducting. The fan is designed for both vertical and horizontal placement. Thanks to its durable ABS plastic construction, this type is suitable for installation in humid environments. Mounting brackets are supplied with the fan.

Ball bearings extend the service life of your fan to 40,000 hours.
The fan is fitted with a more powerful motor, which increases its output by 30% compared with a standard motor of the same diameter.

You set the required temperature manually directly on the fan. If the temperature rises by 2 degrees, the motor starts to run faster. When the room cools down, it switches back to a lower speed.

Fan parameters VK 315 U, with thermostat:
- for flexible and rigid ducting with a diameter of 315 mm
- max. air capacity (output): 1340 m³/h
- power consumption (input): 200 W
- pressure: 505 Pa
- 2655 rpm
- acoustic pressure: 50 dbA
- weight: 5.1 kg
- optimal operating temperature: -25/+50 degrees
- motor overheating protection
- operation for up to 40,000 hours and more
- recommended for ducting with a max. length of 35 m
- protection rating: IP X4

We supply the VK 315 U duct radial fan with thermostat and an output of 1340 m³/h including clips. The speed can only be regulated using an external controller (thyristor or autotransformer). When installing, starting up and handling the fan, follow the Czech instructions included in the package. Connect and install exactly according to the manual and the enclosed diagram.

For advice on using the fan, see this VK guide.
You can find the catalogue sheet here.